Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install a MBRP Black Coated Front Roof Rack Extension on your 2007-2017 Jeep Wrangler JK

Installation Time

1 hours



NOTE:

This kit requires the installation of Off Camber Fabrications Roof Rack Kit # 130717 prior to installation of this Full Rack Extension Kit # 130934.


1. Install the five Grommets into the wiring holes on the underside of the Windshield Hoop.

2. Remove the four Torx headed fasteners from the left and right side windshield brackets. Keep these fasteners, you will reuse them. Refer to Figure 1.

Figure 1


3. Loosely install the Driver Upright and Passenger Upright to the Jeep with the previously removed Torx head fasteners. Be sure to install the Gaskets between the body and the Uprights. Install the Front Crossbar between the Uprights and secure with the supplied 5/16”x2.5 Bolts, 5/16” Washers, and 5/16” Nyloc Nuts. Be sure the wiring holes are facing forward. Do not fully tighten yet. Refer to Figure 2. 

Figure 2


4. The Support Bars attach to the Windshield Hoop, and the previously installed Roof Rack with the supplied Hand Knobs and 5/16” Washers. The Windshield Hoop may need to be adjusted to help align the Support Bars. If your Roof Rack does not have 2 threaded nuts welded on the Roof Rack at the location shown in Figure 4, please contact MBRP Inc. for the required retrofit kit. Refer to Figures 3 and 4. 

Figure 3


Figure 4


5. Tighten the eight [four per side] torx fasteners starting from the top and working down. The surface of the Jeep is not flat. The fasteners must be tightened in this order to allow the mounting brackets to fit correctly. Refer to Figure 5.

Figure 5


6. Install the Center Crossmember in the position of your choice with the supplied Hand Knobs and 5/16” Washers. Refer to Figure 6.

7. Install the Tube Caps with a soft faced hammer.

Figure 6


Congratulations! You are finished. We are sure that you will enjoy this Off Camber Fabrications Off Camber Fabrications product by MBRP Inc.