Simple installation for anyone.
I'm Ryan from extremeterrain.com and this is my review and installation of the Off Camber Fabrication by MBRP Front Light Bar and Grille Guard System fitting all 2007 and up Wranglers. Today we're gonna talk through the installation of this light bar, which is a very simple one out of three wrenches. It's designed to bolt directly onto your Jeep, although there is a small amount of disassembly you'll need to do in order to get all of the brackets installed. Then we're also going to talk through the construction and a few of the other features of the light bar.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Construction. The Off Camber Fabrications Front Light Bar grille Guard System is made from heavy-gauge 3-inch tubing with laser cut brackets made from 10-guage materials. Mounting is both easy and accurate, and the kit includes 2 mounting tabs that can each hold up to 8 inch diameter lights. There is no drilling required for installation, because the light bar is pre-drilled to allow for internal wiring of lights. In fact, the bumper doesn't even have to be removed for installation, and the entire process can be completed in just 30 minutes using common hand tools. This unit is powder coated black.
Accessories & More. In order to install this Off Camber Fabrications part you do need to relocate the brake vacuum pump. Note that though this grille guard system can handle up to 8 inch diameter lights, it does not include lights.
Application. The MBRP, Off Camber Fabrications front light bar grille guard system works with 2007-2018 Jeep Wrangler JK models.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
April 18, 2019
Off Camber light bar
The product is made in China. Seems sturdy. We had to cut a piece off the old vacuum pump housing so the bar hardware would fit. Didn't say that in the instructions. Looks good going down the road. Took around 3 hours to install. If you don't have a lot of mechanical knowledge I suggest you find someone who does. We had to cut a hole in the plastic piece in between the bumper and grill. Didn't say that in the instructions either. Had to remove the bumper. I like it because it covers most of the grill.Helpful (1)
January 18, 2019
Off Camber frabrications grill guard
Unfortunately this product does not fit all aftermarket bumpers. Despite the description saying it should. We returned it amd will keep looking.Helpful (3)
April 09, 2018
Much harder to install than originally thought however looks greatHelpful (13)
April 11, 2017
Makes it look aggressive
Nice upgrade without having to change the bumper. Easy install. Only hard part was relocating the vacuum pump.Helpful (15)
March 13, 2015
Looks great hard to install
Looks great on the jeep. Had to disassemble the hole front end of the jeep and relocate the vacume pump and cut the bracket off the frame just for a light bar.Helpful (17)
November 07, 2014
Strong, durable, hard to install
Very happy with the final product. Very strong, thick and sturdy. Installation was extremely troublesome. I have a 2015 and the vacuum under the front bumper had to be relocated about 4 inches over to allow for the right side bracket to fit correctly. Overall it was worth the time but be warned for 2015 JKU owners that it will require some time.Helpful (16)
September 19, 2014
Worth the wait
First of all once installed it looks fantastic. The process of installation was a pain in the butt.....my poor husband had to buy a bigger electric cutting tool to cut the bar. Also we did research first about installing this bar and lucky we ordered a vacuum pump relocator as we didn't know this either. It would've also delayed the whole installation process. The whole thing (just installation) took about 5 hours!!! My husband did everything 'properly' including doing a good job sanding down the holes that needed to be cut in the front bumper section. If you know what you're doing expect a few hours at least to install, or best thing would be to get someone to install for you. I noticed there's a tiny rust dent starting but a little black touchup paint will fix.Helpful (16)
Can this go through a car wash?
The Off Camber Fabrications by MBRP Front Light Bar/Grille Guard System is strong enough to support the pressure produced by an automatic car wash.
Will this product fit a Sport Wrangler 2017 Jeep stock bumper?
The Off Camber Fabrications by MBRP Front Light Bar/Grille Guard System will work with the stock Jeep bumper.
Will this fit any stubby or mid width bumper? Or do you have any to recommend? Thanks
The Off Camber Fabrications by MBRP Front Light Bar/Grille Guard System is designed as a universal part that will with most aftermarket bumpers, as well as stock bumpers.
I got a grill guard for Christmas but it didn't fit my front bumper. I just have a normal 2013 Jeep Wrangler bumper with no upgrades to it. Would I need to get a whole different bumper to be able to get a front grill guard, or are there some that would fit my bumper????
Some special edition Wranglers feature an upgraded bumper which this product will not be compatible with. If you have the original factory plastic bumper you will need to do some disassembly. You will need to remove your frame cover, splash guard and even your grille. From there you will need to relocate your vacuum pump. This will then install onto the frame horns. Once you have installed the brackets you can put your grille back on the vehicle and continue the install. Once fully installed you will no longer be able to utilize your frame cover however your splash guard should go back on without issue.
Can this go on a stock bumper? I'm trying to look for something like this, where you don't have to change the bumper
Hello, yes, this will work with the stock bumper.
The vacuum pump requires relocation on all 2012-2015 JK models.
Simple installation for anyone.
What's in the Box