How to Install MasterTop Zip Down Wind Stopper - Black Diamond (07-18 Jeep Wrangler JK 4 Door) on your Jeep Wrangler

Note: There is a total of 1 part. 1 – Zip Down Wind Stopper. Installation guide for this Zip Down Wind Stopper is for the 4-door model. The MasterTop Tonneau Cover - Black Diamond – Part# 14500435 (XT# J118478) was also used for this installation guide.

1. Remove the MasterTop Zip Down Wind Stopper from its packaging. Unroll it, lay it flat and remove the paper packaging protecting the plastic window.

2. Lay the MasterTop Zip Down Wind Stopper with the zipper facing the rear passenger seats with the gray side up on the MasterTop Tonneau Cover.

3. Drop down both rear passenger seats to easily access the MasterTop Zip Down Wind Stopper and MasterTop Tonneau Cover zippers.

4. Zip the MasterTop Zip Down Wind Stopper to the MasterTop Tonneau Cover starting on the driver side, and finishing on the passenger side.

5. Flip the MasterTop Zip Down Wind Stopper up so that it lays on top of the MasterTop Tonneau Cover.

6. Wrap the two center straps of the MasterTop Zip Down Wind Stopper around the upper sports bar and secure the straps in the buckle. Do not tighten the center straps just yet.

7. Wrap each side strap around the outer part of the sports part above the seat belt mounts and secure to the buckle of the MasterTop Zip Down Wind Stopper. Tighten the side straps and the center straps now.

8. Open the window of the MasterTop Zip Down Wind Stopper by moving each zipper in the opposite direction of one another. The window will then lay on top of the MasterTop Tonneau Cover when open.

9. Optional: The open window of the MasterTop Zip Down Wind Stopper can be placed between the rear passenger seats and the MasterTop Tonneau Cover as shown below. Be careful not to damage the window, when placing items in the trunk area.

Installation Instructions Written by ExtremeTerrain Customer Brian Voelzke 07/03/2018