(approx) 2 Hours
Simple installation for anyone.
$911.00 (each)FREE Shipping Market Price $1,065.99 You Save 15% ($154.99)
Add Local Shop Installation
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Merideth: If you're in search of a cat-back system that will offer deeper exhaust notes and improved performance for your 2016 or newer Tacoma 3.5-liter while also improving your clearance for off-road situations, this Magnaflow Overland Series Single Side Exit Exhaust System will be a great pick. Now, getting right into sound, this is gonna be a three out of five on the loudness meter with one being completely stock and five being wake-the-neighbors loud.Now, this system is gonna offer more of a mild increase in volume for the Tacoma owner looking to stay more discreet compared to some more aggressive systems while also getting a very comfortable cab environment with little to no drone while you're cruising. Now, this exhaust will feature the higher tuck, no-tip design. So even though it's still got a decent amount of piping here, it's still going to tuck very close to the undercarriage of the truck, increasing your break-over and your departure angles and minimizing any potential damage to the exhaust.Now, this will also feature some small performance gains with increase in piping size and more direct airflow for better efficiency, horsepower, and torque for the 3.5-liter. And not to mention, the system will feature a tunable no-drone technology quarter wave resonator that eliminates all the unwanted noise in the interior so you're able to hold a conversation and keep optimal awareness while you're driving on and off-road.Now, this will be made of 409 stainless steel mandrel bent piping for smooth and direct airflow. And the main piping will be three inches in size that leads straight through the muffler before decreasing to a single two-and-a-half-inch high clearance side exit, which will, again, assist in the rear-end departure angles compared to the factory tailpipe. This will also include factory-style hangers for a factory-like fit and include clamps to make the install happen seamlessly.Now, this kit will be a more premium option coming in at around $1,000 for the kit here. Now, what I will say about this system is the attention to detail and the fit in the function that Magnaflow puts into this exhaust system. Now, this will give you that intentional volume increase without going over the top while also featuring that high-clearance design without eliminating most of the exhaust, which can otherwise change the sound. Now, I think if you're looking for a long-lasting mild exhaust system that's going to increase your performance for the trail and put a smile on your face every time that you hear it, then this is gonna be a great pick.Now, install will be a one out of three wrenches on the difficulty meter, taking you about two hours to get the job done with some basic hand tools. At this point, we can head over to the shop and check out a detailed breakdown of what that install looks like step by step. That's gonna wrap it up for me. Let's go ahead and get into it.Man: So the tool you're gonna need for this install include a 3/8 impact, a 14-millimeter to 15-millimeter socket, exhaust hanger removal tool, penetrating oil, and a towel.What's up, guys? Today we're gonna be installing an exhaust on a Tacoma, so let's get started. So first, we're gonna be taking our 14-millimeter socket and remove these two bolts. Now, using our hanger removal tool and our PB B'laster, we're gonna remove these four hangers. Now, again, PB B'laster and a rag. Gonna hold up the exhaust a little bit, fly out with that hang.So now's a good time to grab a buddy to help you hold up the exhaust while you take your last hanger out. Again, spraying the hanger. All right. Take a fish out of the exhaust. So now we're gonna install our front pipe. First, we're gonna spray our lubricant into the insulator. Now we can take our hanger, put it through, and then we can line up our pipe. And then taking our two factory bolts, we can tighten it in. Now using our universal socket and our 14-millimeter socket, we can tighten that down.All right. So now we're gonna install our front pipe. We're gonna spray some lubricant into this insulator. Then we can slide our hanger into it, line up your pipe, and take your two factory bolts and thread them in. And then you can take your 14-millimeter socket and tighten them down. So now we have our muffler. We're gonna put our clamp into the inlet pipe. We're gonna slide our hanger into our pre-lubed isolator. Now we're gonna take our 15-millimeter socket and tighten this up.So for this second outlet pipe, there's three different configurations. You can either take your resonator, J-pipe, or cap it off. But in our case, we're just gonna use the cap. Now we're gonna slide our clamp into our cap. Slide it into your muffler. Now using our 15-millimeter socket, we're gonna tighten that down. Then we can take our over axle pipe. Go over, line your hanger up with the isolator. Now we can put our clamp on and slide it into your muffler. And tighten it down with your 15-millimeter socket.Now for our last pipe, we're gonna slide our clamp with a hanger on it down about the middle of the pipe. Then take our second clamp, insert it, you can put it into the over-axle pipe, line your hanger up with the isolator. Now we'll take our 15-millimeter socket and tighten both of these clamps. Now you can go ahead and tighten up all your hardware.So that's gonna wrap up the install on our Magnaflow Overland Series Single Exhaust System Side Exit for your '16 and newer 3.5-liter Tacoma. Thanks for watching. And for all things Tacoma, keep it here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
|Exhaust System Type||Cat-Back System|
|Exhaust Tip Finish||Chrome, Polished|
|Exhaust Tubing Diameter||3.00 Inch|
|Exhaust Material||Stainless Steel|
|Exhaust Tip Outlet Style||No Tip|
|Exhaust Exit Location||Passenger Side - After Tire|
Awesome Tone. The Magnaflow Overland Series Single Exhaust System; Side Exit delivers smooth, awesome deep tone sound that’s guaranteed to tickle the ears. Featuring Magnaflow’s No Drone Technology (NDT) the interior noise is eliminated by canceling out the natural droning frequencies that your Toyota generates at highway speeds.
Superior Performance. Engineered for a precision performance, this exhaust system is built to improve your Tacoma’s exhaust flow. Guaranteed to increase your horsepower and torque, there’s no doubt this exhaust is built to perform.
Quality Construction. Crafted from a 3-inch stainless steel tubing, this mandrel-bent construction features CNC precision robotic manufacturing and has been dyno proven for a long-lasting performance. Featuring a stainless-steel mirror finish, this brilliant look is resistant to rust and corrosion.
Installation. This easy install comes with durable hardware and can be completed in approximately 2 hours. No modifications are required but common garage tools are needed for a successful completion.
Application. The Magnaflow Overland Series Single Exhaust System; Side Exit is built to accommodate all 2016-2023 3.5L Toyota Tacoma models.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 2 Hours
Simple installation for anyone.
What's in the Box
10 More Questions