FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install KC HiLiTES 6 in. Apollo Pro Halogen Lights - Driving Beam - Pair on your Jeep Wrangler
Installation Time
60 minutes
Tools Required
- Box Cutter/Knife
- 13mm Socket Wrench
- 14mm Socket Wrench
1. Run the wiring harness's negative wire (black) to the negative (-) terminal of the battery (Figure A).
Figure A
2. Run the wiring harness's positive wire (red) to the positive ( ) terminal of the battery (Figure B).
Figure B
3. Run the wiring harness to the location the switch will be mounted and connect the white wire to the top switch terminal (Figure C).
Figure C
4. Run the green wire to the middle terminal of the switch (Figure D).
Figure D
5. Run the black wire to the bottom terminal of the switch (Figure E).
Figure E
6. Remove the nut on the bottom of the light housing using a 14mm socket wrench (Figure F).
Figure F
7. Run the bolt into the mount location and return the nut (Figure G).
Figure G
8. Tighten the light housing bolt using a 13mm socket wrench (Figure H).
Figure H
9. Run the wiring harness to the light mounting location (Figure I).
Figure I
10. Connect the wiring harness to the light connection (Figure J).
Figure J
11. Repeat Steps 6-10 for the second light.
Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 08/14/2018
