FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install KC HiLiTES 6 in. Black SlimLite Halogen Lights - Spread Beam - Pair on your Jeep Wrangler
1. Connect the negative (black) wire from the wiring harness to the negative (-) battery terminal (Figure A).
Figure A
2. Connect the positive (red) wire from the wiring harness to the positive ( ) battery terminal (Figure B).
Figure B
3. Run the wiring harness to the switch and connect the white wire to the top terminal (Figure C).
Figure C
4. Connect the green wire to the middle terminal (Figure D).
Figure D
5. Connect the black wire to the bottom (bronze) terminal (Figure E).
Figure E
6. Loosen the light mount using a 13mm box wrench (Figure F).
Figure F
7. Connect the light to a light mounting and tighten the washer down to hold it in place (Figure G).
Figure G
8. Run the wiring harness to the mounted lights (Figure H).
Figure H
9. Connect the wiring harness to the light (Figure I).
Figure I
10. Repeat Steps 6-9 for the other light.
Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 08/04/2018.
