FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install KC HiLiTES 6 in. Black SlimLite Halogen Lights - Spot Beam - Pair on your Jeep Wrangler
1. Remove the wiring harness from packaging (Figure A).
Figure A
2. Connect the black (negative) wiring to the negative wiring battery terminal (Figure B).
Figure B
3. Connect the positive (red) wiring to the positive battery terminal (Figure C).
Figure C
4. Run the wiring harness into the cab and connect the black wire to the bottom (ground) switch terminal (Figure D).
Figure D
5. Connect the green wire to the middle terminal of the switch (Figure E).
Figure E
6. Connect the white wire to the top switch terminal (Figure F).
Figure F
7. Attach the light to a light mount (not supplied) and tighten the supplied nut (Figure G).
Figure G
8. Run the wiring harness to the light mounting location (Figure H).
Figure H
9. Connect the light to the wiring harness (Figure I).
Figure I
Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 08/26/2018
