Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P

How to Install KC HiLiTES 20 in. C-Series LED Light Bar Hood Mounting Brackets (07-18 Wrangler JK) on your Jeep Wrangler

Tools Required
  • T-50 Torx Socket
  • 13mm Socket
Extreme Terrain
Shop Parts in this Guide

Take your Jeep’s performance to the next level with serious LED Light output using KC’s hood bracket mounting set. Our Hood Bracket Mount Set is specifically designed to attach KC’s 20” 120W C-SERIES LED Light bar or 20” KC FLEX to your factory 07-16 Jeep JK hood. Constructed from high quality powder coated steel, these highly durable mounts easily attach to Jeep JK hood bolt holes with no cutting or drilling required. 

Parts Included:
2 x Jeep JK Hood Mount Brackets
4 x Steel Spacers - Black Zinc
4 x M8-1.25 x 30mm Hex Bolts - Black Zinc
4 x M8 Flat Washers - Black Zinc


KC takes extreme measures to engineer lighting products with the most advanced features available in the industry. All of our products are fully tested in rigorous conditions and with proper care and installation will last you a lifetime. 

Adding a light bar to your 2007-2016 Jeep JK has never been easier with KC’s hood mount bracket set for 20” LED Light bars. Designed for Jeep JKs our mounts are incredibly easy to install, attaching directly to factory hood mounting locations. 

KC’s 23-Year Warranty offers a guarantee from manufacturers defects from the construction and workmanship of the bracket set. For more details about our Warranty Policy please visit 



Thank you for becoming part of the KC HiLiTES family and purchasing one of our premium KC products! With over 45 years of history in the auxiliary lighting market, you have become a part of our ever growing family, and we encourage you to register your product online at HTTP://REGISTER.KCHILITES.COM to ensure you get all the benefits of owning a KC HiLiTES product. 

• Receive a unique serial number certifying your purchase
• Fast and Easy Returns and Warranties
• Special offers and promotions
• Exclusive access to industry events


1. Remove Hood Hinge Bolts

Locate the 2pcs Torx bolts that attach the hinge to the hood. Use the T-50 Torx socket to carefully remove the bolts from one side only (you can start with passenger or driver side). 

2. Attach Hood Mount Brackets

Place one of the supplied steel spacers over each hole on top of the hinge, then sit the bracket on top and secure by screwing in the supplied M8 hex bolts flat washers with the 13mm socket. 

Repeat steps 1-2 for other side.

3. Install your KC 20” LED Light Bar

Install light bar and harness per supplied instructions.