How to Install Kargo Master Light Bar Mount Kit For 2 in. Diameter Tube (07-17 Wrangler JK) on your Jeep Wrangler

1. Carefully open the package using a box cutter or knife (Figure A) and ensure the mount and hardware are included and undamaged. 

2. Insert the light mount grommets on the small open end of the mounts (Figure B). 

3. Attach the small outer clamp end of the brackets around the grommets (facing inward) (Figure C) and secure using the supplied bolts and Allen wrench (Figure D). 

4. Bolt both small ends of the brackets (with grommets facing inward) to the light bar (not included) (Figure E). 

5. Attach the large outer clamp end of the brackets around the tube where the mount will be affixed (Figure F) and secure using the supplied bolts (Figure G). 

6. Position the light to the desired angle and press cap covers (supplied) in place.

Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 10/03/2017