Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$3,000 Fall Giveaway! Enter Daily >

How to Install Kargo Master Grab Rail (07-18 Wrangler JK) on your Jeep Wrangler

Installation Time

2 hours

Step 1
Remove end caps from extrusion.
Slide four 5/16" x 3/4" carriage bolts into the top of the extrusion. Either slide from the end of the extrusion or through one of the access holes.


Step 2
Place Grab-Rail and match up with fasteners previouslyinstalled. Attach top of Grab-Rail to carriage bolts using four 5/16" flat washers and four 5/16" NYLOC nuts.
Snug tighten


Step 4
Position your Grab-Rail in desired location.
Tighten nuts and bolts to secure K-Rail.


Your installation is now complete.