FREE 1 to 3-Day Delivery on Orders $119+ Details
*PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING AND USING THIS PRODUCT*
Warning
Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products.
Be sure to have Mod-Rak EXP platform built. You can have the EXP on or off the vehicle.
Do not tighten bolts until told to do so.
Snug to allow movement, Yet also stay together.
Apply E6000 to both ends of the passenger/driver side channel (60226-20/60226-20M). *Bonding material will seal and bond joints for a rigid and water tight connection.
Have the tabs of the side channels facing in towards the center of the surround.
Insert swedge joints together
Bolt swage plates together using two 1/4"-20 button heads and two 1/4" flat washers per corner.
On each side of the EXP, place three carriage bolts apporximately 25" apart with the thread of the carriage bolt sticking up past the extrusion. Drop carriage bolts through the circular cut out in the center of the extrusion.
Place previously assembled surround on top of the EXP.
Align slots in the tabs with the carriage bolts.
Bolt surround (60226) to EXP using previously installed carriage bolts, 5/16" flat washers and 5/16"-18 Nyloc nuts.
Square and align your surround on the EXP.
TIGHTEN all bolts
Your installation is now complete