Transfer Case Intermediate Shaft Spacer (66-86 Jeep CJ5 & CJ7)Find parts that fit my vehicle

Restored Gear Alignment and Driveline Quietness. The Transfer Case Intermediate Shaft Spacer for 1966-1986 Jeep CJ5 & CJ7 is a critical precision component designed to maintain the exact lateral positioning of the intermediate gear cluster within the Dana 18 or Dana 20 housing. By filling the specific tolerance gap between the internal needle bearings and the thrust washers, this spacer prevents the gear walking or axial play that leads to excessive noise and harmonic vibrations. It is an essential replacement for any restoration project aiming to eliminate the notorious transfer case whine and ensure that the drivetrain operates with the smoothness and quietness of a factory-new assembly.

High-Carbon Steel Construction for Maximum Compression Resistance. Built to withstand the constant rotational friction and side-loading forces of off-road driving, the Transfer Case Intermediate Shaft Spacer for 1966-1986 Jeep CJ5 & CJ7 is manufactured from premium-grade, heat-treated steel. This robust material ensures that the spacer does not deform or compress under the high-torque loads encountered during low-range crawling or when utilizing oversized tires. Whether you are navigating steep rocky inclines or cruising at highway speeds, this spacer provides the structural integrity required to keep your internal bearings perfectly spaced for years of reliable service.

Installation. Putting this Transfer Case Intermediate Shaft Spacer on your Jeep CJ5 & CJ7 takes 3 hours to install.

Warranty. There is a limited lifetime warranty on this product.

Application. The Transfer Case Intermediate Shaft Spacer fits 1966-1986 Jeep CJ5 & CJ7 models.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov