Installation Time
(approx) 2 Hours
Difficulty Level:
Light to Moderate mechanical skill required.
FREE 1 to 3-Day Delivery on Orders $119+ Details
Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Rear Bumper with Tire Carrier and Jerry Can Holder (07-18 Jeep Wrangler JK)
Item J166586
Product Information
Features, Description, Q&A, Specs & Installation
Features
- Heavy-Duty Rear Bumper
- Cold-Rolled Steel Plate Construction
- Fully Welded
- Two-Stage E-Coat and Textured Black Powder-Coat Finish
- Direct Bolt-On
- Integrated Swing-Out Tire Carrier
- Two Jerry Can Mounts
- Includes (2) 2-Gallon Jerry Cans
- Two-Inch Hitch Receiver with 9,500-Pound Weight Capacity
- 2.75-Inch D-Ring Mounts
- Includes 2 18W LED Cubes
- Limited Warranty
- Fits 2007-2018 Jeep Wrangler JK Models
Description
Toughen Up Your Jeep’s Rear-End. Are you unenthused by the appearance of your Jeep’s factory rear bumper and spare tire carrier combo? Then consider upgrading with this Heavy Duty Rear Bumper with Tire Carrier and Jerry Can Holder. This product features rugged, cold-rolled steel plate construction, an integrated swing-out tire carrier that can hold up to a 37-inch tall tire, 2 Jerry can mounts, a 2-inch receiver hitch, auxiliary reverse cubes, and 3-quarter-inch D-Ring mounts for heavy-duty recovery points, making this Wrangler bumper a viable replacement.
Heavy-Duty Construction. There’s no sacrifice in quality here! This rear bumper is built to last, manufactured entirely from cold-rolled steel for exceptional strength and durability. Each joint is fully-welded front and rear for additional structural rigidity. The entire bumper is finished in a durable 2-layer coating, consisting of a corrosion-resistant E-coat and a durable textured black powder coat to guard against scratches, abrasions, nicks, oil, chemicals, and UV fading.
Integrated Hitch. If you regularly tow in your Jeep, this bumper is a must! With a built-in 2-Inch hitch receiver and a 9,500-pound weight limit, this bumper can handle as much as your Jeep can carry.
Spare Tire/Gas Can Mount. This bumper also features a heavy-duty spare tire mount, capable of easily supporting up to a 37-Inch tall tire. Tucked away behind the spare tire are two Jerry cans in their appropriate mounts, holding up to a combined 4-gallons of gas.
Warranty. A limited warranty covers this product against defects.
Application. This Rear Bumper with Tire Carrier and Jerry Can Holder fits 2007-2018 Jeep Wrangler JK Models.
CA Residents: 
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation & What's in the Box
Installation Info
What's in the Box
- (1) Bumper
- (2) Jerry Cans
- (2) LED Pods
- Hardware
4.8
Reviews of similar Exterior Products (16)
Reviews of similar Exterior products have an average rating of 4.8 out of 5
Questions & Answers
10 More Questions
Sponsored Ad
Word On The Trail
If you ask a question, you get a real response from a real person looking into your application for whatever it is you are buying. They have a great review section and will even help with install questions.
Meet Our Team
Ryan E, 2002 Jeep Wrangler TJ
Marketing Coordinator
I have been into Wranglers since I was young. My dad has owned quite a few over the years and if I wasn’t in a lifted wrangler I was in something lifted. When I was old enough to drive I bought a Cherokee and went through 3 of them before deciding I wanted a Wrangler. So I sold my Cherokee and sat o...
I have been into Wranglers since I was young. My dad has owned quite a few over the years and if I wasn’t in a lifted wrangler I was in something lifted. When I was old enough to drive I bought a Cherokee and went through 3 of them before deciding I wanted a Wrangler. So I sold my Cherokee and sat o...
Sponsored Ad
