ExtremeTerrain is proud to offer FREE SHIPPING on any order over $75!
Free 2-3 Day Delivery on most items, see Product Page for details.
Free Shipping Offers are for Standard Ground Delivery Service and are only valid for shipping addresses within the 48 contiguous United States. Truck freight and oversize charges still apply unless otherwise noted, and can only be shipped to the lower 48 States. Rough Country items are not included in Free Shipping offers. Tires and Wheel and Tire Kits do not qualify for free shipping.
Shipping to Alaska and Hawaii will require an additional charge.
Hi, guys. So, today we're checking out the Lux LED Tail Lights fitting all 2007 to 2018 at JK Wranglers. So, if you are in search of one of the most affordable options for tail lights, that's going to completely switch up the look at the back end of your Wrangler while also helping out your lighting performance, this is going to be a great choice to take a look at. Now, this is going to come with multiple LEDs up at the top and down at the bottom that are going to increase that lighting performance if you've noticed a lack in lighting performance from your factory tail lights, or if you're just looking for better visibility while backing up at night, or better visibility for other drivers to see you on the road for safety. Now, this is also going to have a pretty chunky outer housing which I personally do like. It gives it a more rugged and off-road feel to the light in comparison to some other options that will have a slimmer housing, and it's going to be in that sleek black color, which is going to add a very sleek and off-road, again, look to the back of the JK. Now, I do particularly like the fact that not only are these going to offer styling and a better lighting performance, but they are going to be durable as well. This does come with a polycarbonate lens on the front, so these will be able to hold their own while you take your Jeep out on the trail.Now, with that being said, like I told you guys before this is going to be a pretty affordable option at roughly $175. Now, in comparison to some other choices, it kind of comes down to your personal preference and how you want the light to be set up. This is going to have that clear choice as to where some other choices will come with a red lens or even a smoked lens. And then some other choices that are a little bit more expensive may have some extra bells and whistles. They may be sequential, or they may have a fiber optic running light or fiber optic style running light should I say in comparison to this where it keeps it a little bit simpler. Now, I personally think that the simplicity shines through in this and if you're looking to save a couple of bucks, this is going to be a great stylish choice.Now, as far as install is concerned I'm gonna give this a one out of three wrenches on the difficulty meter, this is gonna take you no time at all to get this thing installed it with some very basic hand tools. So, speaking of the install, let's jump into that now. The tools that I used may install were an impact wrench and a Phillips head socket.So, our first step to taking out our taillights is to remove the two Phillips head screws that are holding it in. Now, I'm gonna be using a Phillips head socket and my impact wrench but you could also use a Phillips head screwdriver for this. So, the two screws that we need to remove are on the inside, we're gonna take that Phillips head socket and go ahead and remove those. Once those are removed, we're gonna save those because we'll reuse them. But we can pull off our tail light and press down on this tab to unplug it. And that is the uninstall of our tail light, we can grab our new one and install it.Next we can take our new tail light, and we're gonna start by plugging it in. This is gonna have a factory style plug and play connector. Make sure you hear a click, then we can line this up. We're gonna have two tabs on the inside that need to kind of hook into the body then we're gonna line up our mounts for our screws. Then we can take our factory screws and secure them down. Once those are hand threaded in we can take our Phillips head socket or the Phillips head screwdriver and secure those down. I would like to mention that you should not overtighten these screws because this is plastic and you don't wanna crack the plastic, especially if you're using an impact wrench. But once those screws are attached, then we can repeat that same process on the other side.I did wanna stop down and show you guys our factory tail light next door a new option, show you some of the similarities and differences between the two and why upgrading to this new LED tail light is going to be very beneficial. So, starting off with just a brief overview of our factory light, we have the standard or black housing on the outside, we have the standard factory red reflector and a white reflector down at the bottom for the reverse light and this is gonna come up with a halogen bulb. Now, when moving over to our new option, this is going to completely switch kind of everything around. We have a black housing that is going to stay roughly the same, however, it's gonna have a nice gloss black look to it. We're gonna have multiple LEDs inside with a clear polycarbonate lens, and we're also going to have a just a more durable setup. Now, the LEDs for the reverse lights are also going to have a dome style lens, which means that they are going to be incredibly bright, a lot brighter than our factory halogen. Overall the LEDs are going to look a lot more modernized and they're going to be very bright. So, that's gonna help you out with your visibility when you're backing up at night, and of course, making you more noticeable on the road to other drivers, which is very important. So, overall, this is going to be a big upgrade from the factory light. Not only is it going to help you out with performance, but it's also going to add a lot of styling to the back of the Jeep.So, that is going to wrap it up for my review and install. Make sure you like and subscribe for more videos and products just like this. And always keep it right here at extremeterrain.com.
With Turning Signal, Running, and Brake Light Functions
Ultra-Bright, 30-Watt Reverse Lights
Tough, Clear Polycarbonate Lenses
Fully Encapsulated, Black Housings
Completely Sealed to Keep Water and Dust Out
Easy, Plug-and-Play Installation
Sold as a Pair, Driver and Passenger Sides Included
Designed for All 2007 to 2018 Jeep Wrangler JK Models
Description
Distinctive Style and Brilliant Lighting. Make your Wrangler easier to spot in the dark, especially by those following behind to ensure a safer driving environment for you and the other road users. Install this pair of brand-new LED Lux Tail Lights on your Jeep for improved visibility during daytime, night, dawn, and dusk hours. Moreover, these LED lights feature distinctive illumination functions and a rugged appeal for an added style.
Lighting Functions. These Lux Tail Lights ensure reliably powerful lighting with minimal power use. Each light assembly comes with (21) 1-watt LED turn signal, running, and brake lights. It also features 30-watt high-output reverse light. In addition, these lights can serve you with optimum performance for a long period of time.
Off-Road Durability. Built to match your Jeep’s rugged lifestyle, these Tail Lights have heavy-duty black enclosures. The shatter-proof clear polycarbonate lenses exhibit high strength to handle the physical impacts of various road hazards. Each tail light is also fully sealed for long-lasting functionality.
Bolt-On Installation. Featuring simple installation, each unit of these LED Lux Tail lights directly bolts to the factory mounting locations of your vehicle. The plug-and-play installation process completes with light mechanical and electrical skills required.
Application. The LED Lux Tail Lights are designed to fit all 2007 to 2018 Jeep Wrangler JK models.
Extended Warranty. ExtremeTerrain/Turn5 Inc. is proud to offer an optional 12 month extended limited warranty to our customers that purchase an eligible product. The program administrator will replace the cost of the covered part of a period of 12 months after the manufacturers warranty elapses, or from the date of purchase if the manufacturer does not offer a warranty.
Coverage. A Covered Part has failed when it can no longer perform the function for which it was originally designed solely because of its condition and not because of the action or inaction of any non-covered parts. The benefits available under this Limited Warranty are strictly provided to you for the replacement of the Covered Part(s) which fails due to a defect.
Notification Sent Via Email. You will receive notification of your enrollment in the extended product warranty program via email within 24 hours of placing your order. Please save this email for possible future reference.
No Deductibles Required. There are no deductibles required for use of this extended product warranty. If your covered part fails within the extended warranty time frame, simply call the program administrator at 1-844-870-4881 for instructions before any repairs or replacements have begun. Additional contact details and instructions will be included in your confirmation email.
WARNING: Cancer and Reproductive Harm - 
