Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler! Enter daily!
Win N-Fab Side Steps! Enter Daily!

How to Install Jammock Black 2.0 Jeep Hammock on your 87-18 Jeep Wrangler YJ, TJ, JK & JL

Installation Time

5 minutes

Extreme Terrain
Shop Parts in this Guide

Installation Instructions:


1. Lay the Jammock down across the seats where you wish to install it. Wiggle the four straps to the jammock in between the plastic and roll bar.


2. Feed the strap into the metal teeth on the opposing side. Be sure that you feed the straps into the teeth like in the picture below


3. Once you feed the straps into the teeth tighten it down securely and you’re done!


4. The jammock is a great way to keep the sun off of you if you would like to take the top down. This is what it looks like from underneath.


5. If you choose to leave the jammock on your roll bar the sun visors may get in the way of the straps, but it’s no big deal. They will just lay a bit flatter than normal.


6. Before and after.


Installation Instructions Written by ExtremeTerrain Customer Alex Smith 10/08/2016