Installation Time
(approx) 20 Minutes
Difficulty Level:
Simple installation for anyone.
FREE 2 or 3-Day Delivery on Orders $119+ Details
$197.99 (kit)
FREE Shipping Market Price $252.99 You Save 22% ($55.00)Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Merideth: If you ever catch yourself in the back of your Jeep wishing you had a place to put down whatever you're holding, this Fishbone Offroad tailgate table fitting all 2018 and newer JL Wranglers may be for you. This table will mount to your tailgate and fold down giving you a spot to put your drink, tools, phone or really whatever you have in your hands making your life a whole lot easier. Now this will integrate cup holders on this side and even have a slide out cutting board here making it a must-have when you're tailgating at a sports event, or stopping down on the trail for lunch. The table when folded up will also have MOLLE weave attachments for some additional storage if you need it in the cargo area of your Wrangler. Now, the entire thing is going to be pretty durable as well, made of a 1/8-inch thick steel with a nice black powder coat finish on top.Now, that's going to protect the seal and of course match with any other texture black accessories. You're also getting some pool pin locks here to make sure that it stays shut and to prevent any rattling, you are gonna get some rubber bump stops. Now, I do also like the fact that you're getting a large Fishbone cut out right in the middle. That's gonna give you some extra brand and styling for whenever you open it up. Now, the install will require a little bit of drilling which isn't completely foreign to tailgate tables but it is going to be very straightforward and super easy. I would just keep that in mind when taking a look at this table. Now with all of that being said, this is gonna to be pretty average when it comes to price. When comparing it to other solutions, are coming in at roughly $225.Now what I will say, though, is that this choice brings a little bit more to the table, pun intended, with the cup holders and the included cutting board. This will be very low profile as well, and it's not gonna to incorporate as many MOLLE cut outs that some other choices have. However, if you don't necessarily need this for a ton of additional storage, you're really just looking for a solid table solution that comes with a little bit more than the average table, then this is gonna be it. Now, getting into install, again, this is going to be easy and a one out of three wrenches on the difficulty meter, taking you no longer than 20 minutes to get this on your JL. Now, speaking of the install, one of our customers here has installed this on their Jeep and is gonna walk you through that process of how to get it onto yours. That's gonna wrap it up for me. Let's go ahead and get into the install.Woman: Tools that I used today was a drill, my 9/16 drill bit, a 4 and 5-millimeter Allen wrench, pen, tape measure and multiple drill bits for my pilot holes. I also used a roll of tape underneath the main vent while drilling, that way I wouldn't drill into my carpet. Start by opening your vehicle's tailgate. Begin removing the air vent interior panels quite carefully and evenly pulling out the body clips. The installation will be using these four mounting points. Flip the main panel over and with the tape measure, measure one and five-eighths from this rib. One, two, three, four, five and make a mark. Now, from this vent, measure down three-eighths. I'm gonna start here. One, two, three. Mark this intersecting point. This will be your drill point. With a drill bit, drill a pilot hole and work your way up to a 9/16. Reinstall the main panel and ensure that the drilled hole lines up with the lowest mounting point. Open up the table and place it against the panel. With the three of the smaller bolts, washers and spacers, secure the top three holes with a 4-millimeter Allen wrench.Finally, with the larger bolt and washer, secure the bottom drilled hole with a 5-millimeter Allen wrench. I went back and double checked and made sure that all of my bolts were fully tightened. Now you can enjoy your new Fishbone Offroad tailgate table. I want to show you something real quick. When I first tried closing the tailgate table, I noticed that the pins didn't quite line up with the hole and they were both like this on the left and right, but after some, you know, pushing and wiggling, I was able to get them in and now it does open and close with ease. It was like this on both sides. I think this might have been done on purpose because now, I mean, this tailgate table is, it's shut. It's shut, it's tight. There's virtually no wiggling and I think it's gonna really reduce on rattling. So I just wanted to share that real quick because it was a little nerve-wracking at first and I did get worried, but it did straighten itself out and as you can see, it's quite level and straight and they open and close real easy.Merideth: So that's gonna wrap it up for my review and the install of the Fishbone Offroad tailgate table, fitting all 2018 and newer JL Wranglers. For more videos and products just like this, remember always keep it right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Brand | Fishbone Offroad |
Camping Gear Type | Tables |
Makes Your Tailgate Camping-Ready. With this Fishbone Offroad Tailgate Table, you don’t need to bring big and bulky tables for your camping and picnics. This accessory helps convert your Jeep’s tailgate into a convenient kitchen table. This foldable table is mounted on the inside of your tailgate and comes with excellent features. It includes 2 cup holders and a removable cutting board. Meanwhile, the table’s underside is crafted to support standard MOLLE weaving and attachments.
Steel Construction. For a strong and long-lasting build, this tailgate table is made of 1/8-inch-thick steel. Its metal surface is laser cut with the Fishbone Offroad logo, giving it a sleek and unique look. Furthermore, the table is applied with a black powder-coat finish to make it highly resistant to rust and corrosion.
Easy Installation. This tailgate table is easy to install, but it requires some minor drilling. For a quick install, please read the manual first to familiarize yourself with the step-by-step process.
Comes with a 90-Day Warranty. For the customer’s assurance and protection, Fishbone Offroad offers this tailgate table with a 90-day warranty. If your purchased item gets damaged within the said period, you may contact customer service to guide you with the warranty claim process.
Application. This Fishbone Offroad Tailgate Table is made to fit 2018-2023 Jeep Wrangler JL models.
Fitment:
Fishbone Offroad FB25220
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 20 Minutes
Difficulty Level:
Simple installation for anyone.
What's in the Box
10 More Questions