Installation Time
(approx) 20 Minutes
Difficulty Level:
Simple installation for anyone.
FREE 1 to 3-Day Delivery on Orders $119+ Details
I'm Ryan from ExtremeTerrain.com and this is my review of the 4-foot Firestik CB Antenna fitting all 1987 to 2016 Wranglers. These are for those of you looking for a CB setup for either on the road or on the trail and are looking for a high-quality tunable antenna. Of course, you also need a mount, wiring and the CB radio itself, but as part of a setup, this is a really high-quality option even if it is a little bit more expensive than some of the other ones on the market. You'll want to size your antenna according to where you're going to have it mounted on the Jeep. If it's too high and it sticks up too far above on the roof line of the Jeep, it can get snagged on tree branches and possibly bend and break. But if it's too low, the Jeep itself can interfere with reception. This is a 4-foot tall antenna that has a fiberglass core so it can bend a little bit without breaking and it has a three-eighths by 24 standard thread so it'll attach to most standard mounts.Getting your antenna installed on your Jeep is really easy. All you do is thread it into whatever mount you have on your Jeep. But of course, that's only one part of your setup. You still have to get clean 12-volt power to your CB radio itself and run your antenna wires. Once you have all that set up, then you can tune your antenna. And tuning is a very important part of running a CB setup. You'll use an SWR tuner to make sure that the length of the antenna is properly set up for your vehicle. Even though installing the antenna shouldn't take you more than 15 minutes, tuning can take a little bit of time. As I said before, this antenna is a little bit more expensive than some of the other ones on the market. But when you're looking into electronics and antennas specifically, build quality is everything. If it's not a high-quality, well-built antenna, you're not going to be able to get the proper reception out of it, making the whole CB system useless.So whether you're looking for a CB setup in your rig for trail rides so you can take to your buddies, or you want something to be able to communicate on the highway, having a high-quality CB antenna is one of the most important parts of that setup. So that's my review of the 4-foot Firestik CB Antenna, fitting all 1987 to 2016 Wranglers, that you can find right here at ExtremeTerrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
4' flexible design. Be prepared for any situation with the Firestik II CB antenna. Made with a fiberglass core this antenna will bend from trees and brush without breaking making it perfect for any trail or trip.
Dependable performance. The unique coil design increases the antennas power while broadening its overall bandwidth. Allowing your CB radio to cover more ground when transmitting and receiving calls which is helpful in emergency situations. This antenna is reliable thanks to its water tight sleeve and rust proof brass.
Easily tuned. Thanks to Firestick's patented tuning cap, tuning the antenna to your Wrangler is now easier then ever. Simply remove the top and adjust the screw with your hand, no tools are required.
Simple installation. the 3/8"-24 thread fits all Firestik mounts and CB radios. Simply screw the antenna in the mount and it is ready for use after tuning.
Application. The Firestik II 4' Antenna is designed to fit all 1966-2023 Jeep CJ and Wrangler models with CB Antenna mounts.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 20 Minutes
Difficulty Level:
Simple installation for anyone.
What's in the Box
(1) Antenna10 More Questions