10K 4-Point Sway Control Reciever Hitch without Shank (Universal; Some Adaptation May Be Required)

Stop the Sway. Make sure your trailer stays smooth and steady with the Equal-i-zer Tacoma 10K 4-Point Sway Control Receiver Hitch without Shank. Offering 4 points of padded contact with your trailer, this stabilizer has a maximum gross trailer weight of 10,000 Pounds and a tongue weight capacity of 1,000 Pounds. Weighing 110 Pounds, the sway control system prevents your trailer from veering out from behind your vehicle, protecting both the trailer and other travelers on the road in the process.

Quality Build Construction. Made using high-quality steel materials, this part has built-in sway control and doesn’t require additional add-on sway bars.

Straightforward Installation. The Tacoma 10K 4-Point Sway Control Receiver Hitch without Shank comes with a snap-up lever, hitch head, and the installation hardware needed to fit it to your hitch receiver with no tapping or drilling necessary.

Protected for Life. Thanks to the manufacturer’s limited lifetime warranty, you can return this anti-sway system for repair or replacement if you discover a material defect or any issues with craftsmanship. Note that this is a limited warranty that does not apply in cases of neglect or user damage.

Application. The Tacoma 10K 4-Point Sway Control Receiver Hitch without Shank is designed to fit all 2 x 2-Inch hitch receivers. Your trailer must have a 6-Inch frame or smaller to fit this device.

Installation Difficulty. An owner’s manual and all of the hardware needed to fit it to your hitch receiver is included. This anti-sway system installs in about an hour and only requires moderate automotive knowledge. You will need to use your own tools to install the provided hardware.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov