Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12k Summer Sweepstakes! Enter Daily>

How to Install Rugged Ridge Elite Tail Light Guards - Black on your Wrangler

Shop Parts in this Guide

1. Remove hardware from tail lights and disconnect from vehicle wiring harness.

2. Remove rear trim piece from both tail lights.

3. Encase tail light inside Housing and Guard using M5 Screws.

4. Reconnect tail light to vehicle wiring harness.

5. Secure assembly to vehicle using #6 Screws in remaining attachment points.