FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install DV8 Off-Road FS-17 Hammer Forged Front Bumper (07-18 Wrangler JK) on your Jeep Wrangler
Installation Time
1 hours
Tools Required
- ½" Drive Ratchet
- 18 mm Socket
- 16 mm Socket
- Flat Head Screwdriver
- Phillips Head Screwdriver
Shop Parts in this Guide
Installation Instructions
1. Disconnect and remove fog lights from the stock bumper.
2. Using a Philips head and flat head screw driver remove the upper and lower plastic gap covers.
3. Using an 18MM socket, remove (8) body bolts from the stock bumper.
4. Carefully remove OEM bumper from the front of the vehicle.
5. Carefully place DV8 front bumper onto stock threads. (May need another pair of hands for this step)
6. Using a 16MM socket, begin bolting new bumper into existing threads using provided hardware. (6 nuts, washers, and lock washers. 2 bolts, lock washers, and washers.)
7. Reconnect fog lights or accessories and admire your new bumper.
Installation Instructions Written by ExtremeTerrain Customer Seth Moore 09/20/2017
