Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 In Store Credit Enter Now

How to Install a Drake Off Road A/T Shift Knob on your 2011-2017 Jeep Wrangler JK

Installation Time

10 minutes

Tools Required
  • Flat Blade Screwdriver
  • 2.5mm Allen Wrench
Extreme Terrain
Shop Parts in this Guide

Thank you for purchasing a quality Drake Off Road product. Please refer to the installation instructions below when installing this product.

SHOWN: JP-181113-BL


Step 1: Using a flat blade screwdriver, carefully pry down the lower chrome collar at the seam to release the retainer clips.

Step 2: Pull up on the shift knob and remove the chrome collar.

Step 3: Remove Drake’s exclusive ployurethane, tire-tread grip from Drake Off Road shift knob.

Step 4: Install the Drake Off Road shift knob, and align the allen set screws with the flat surface of the shifter.

Step 5: Tighten the allen set screws evenly to secure the shift knob.

Step 6: Install the Tire Tread.

Step 1

Step 2

Step 3

Step 4

Step 6


If you are not happy with this product, for any reason, or found product to be defective in manufacturing, simply return it to Drake Off Road within 30 days of purchase and we will replace it - no questions asked. We stand behind our products one hundred percent, so you can sit behind the wheel with pride.

*Proof of purchase and dated reciept must be present with any return. All returned products are tested and if found to be damaged by the installer, no replacement will be issued. You pay the the cost to ship to us, we pay for the return shipping. Guarantee does not include any labor and/or tax charges incurred.

Fire Extinguisher Mount

NHRA approved, the Drake Fire Extinguisher Mount is machined from 6061-T6 billet aluminum with a black anodized finish and a laser etched logo. Features include a red anodized quick release knob, and versatile mounting options. Fits various sizes of automobile fire extinguishers.
Clamps sold separately.

Drake Off Road Flashlight Mount

New by Drake Off Road, this universal Flash Light Mount is machined from 6061-T6 billet aluminum with a black anodized finish to match our popular Fire Extinguisher Mount part # FIREXMNT-DOR. Features include a red anodized quick release knob and versatile mounting options. This mount has been engineered to accept the most popular Flashlights.

Jeep JK Fire Extinguisher Mount Bracket

New from Drake Off Road, our heavy duty Steel Bracket with dull black powder finish is used to mount Drake Off Road’s exclusive Fire Extinguisher (FIREX-MNT-DOR) or Flashlight Mount (LIGHT-MNT-DOR). Hardware included.

Differential Cover – Dana 44 Axle

Rugged, tough, and ready to take on the most extreme off-road adventures imaginable! Add character to your Dana 44 axle with this aggressive patent pending tread design Differential Cover by Drake Off Road. Increase the structural rigidity of the whole axle. Increased oil capacity decreases the operating temperature of the gear oil. Engineered from high tensile nodular cast iron with a thick ½” mounting flange and a ¼” housing, this differential cover is ready to protect your gears and locker from the most punishing rocks and trail hazards! Incorporated recesses protect the allen bolt heads from trail damage. This is the perfect accessory for your Jeep JK or TJ, and it also fits all solid Dana 44 axles. These differential covers have a powder coated grey finish, class 12.9 hardware (18% stronger than grade 8 hardware), and complete step-by-step instructions for easy installation.