Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler! Enter daily!

How to Install Dirty Dog 4x4 Rear Seat Netting - Black (07-11 Wrangler JK 4 Door) on your Jeep Wrangler

Installation Time

60 minutes

Extreme Terrain
Shop Parts in this Guide

1. Set the rear seat netting over the back of the vehicle (Figure A).


Figure A

2. Run a lengthy front corner strap over the roll bar and around and through the buckle (Figure B).


Figure B

3. Run the other lengthy strap over roll bar on the other side (Figure C).


Figure C

4. Run the side straps around the roll bar (Figure D).


Figure D

5. Run the side straps through the buckle to secure (Figure E).


Figure E

6. Run two of the supplied straps through the rear clasp and around the rear roll bar (Figure F).


Figure F

7. Run the other two supplied straps through the front clasp and around the roll bar (Figure G).


Figure G

Before

After

Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 07/24/2018