Review & Install Video
I'm Ryan from ExtremeTerrain.com, and this is my review and installation of the LED third brake light in crystal clear, fitting all 1997 to 2006 TJs. Today we're going to talk through the installation of this third brake light, but also talk through some of the features and the construction.
This LED third brake light is going to be for those of you who still have a factory third brake light mount on your TJ, and either have a burnt out third brake light and are looking to upgrade to a brighter LED light that's going to last longer, or somebody who already has some crystal clear style rear taillights and are looking for a third brake light that's going to match. This is less expensive than some of the other LED third brake lights that you can get on the market, while still being a plug-and-play easy installation.
This third brake light is plastic and has a total of six red LEDs inside of it. The whole housing is, as I mentioned, made of plastic, except for the rubber waterproof foam gasket that's around the outside. This is designed to be a direct replacement for your factory third brake light, so it'll attach using all of the factory hardware in the factory position, and as I mentioned before, this is plug-and-play, so there's no wiring required for the installation.
Because this is designed to bolt right in the location of your factory third brake light on that factory third brake light mount, this installation is a very simple one out of three wrenches, and shouldn't take you more than 15 minutes to complete. On the back of this light comes a plug-in end that will go directly where that factory light bulb would have gone, so all you need to do is remove the two screws that hold the factory lens in place, remove the bulb, plug in this end of your new third brake light, and put the rest of the third brake light in the housing using those factory screws. The only tool you'll need to get this job done is a screwdriver.
As I mentioned before, this third brake light is going to be less expensive than some of the other LED third brake lights that are available on the market. Now, generally, you do get what you pay for when it comes to lighting, so these LEDs may not last quite as long as some of the other ones on the market, they may not be quite as bright, but if all you're looking for is a third brake light that's going to match your crystal clear taillights and you're not as worried about the brightness or the longevity, this is a nice way to save a little bit of money over those more expensive brands.
So, whether you're looking to replace your factory third brake light because you want something that will match your crystal clear taillights, or you're just looking to upgrade to a brighter LED light over that factory incandescent, this is going to be an inexpensive and easy-to-install option.
So, that's my review of the LED third brake light in crystal clear, fitting all 1997 to 2006 TJs, that you can find right here at ExtremeTerrain.com.
Super Clear Visibility.
Replace your burnt out damaged, factory 3rd brake light with a brighter rugged LED. The Axial Crystal Clear LED 3rd brake light features a long-lasting light that will never go out of style with high-quality bulbs and durable design. The clear lens will help you be more visible to drivers behind you so they know when you are stopping. Minimal maintenance is required as the lens are waterproof.Premium Construction.
Upgrade your stock 3rd brake light with a top-quality LED 3rd brake light. The brake light is coated in satin black and has rectangular crystal clear lens for enhanced visibility in all types of conditions. The Axial Crystal Clear 3rd brake light features 6 bright red LED bulbs to ensure proper braking. The 3rd brake LED light is a major improvement over the stock ones. The bulbs will last you for an extensive period of time. Easy Installation.
Switching out your stock brake lights should be an easy process. Unlike some of the other aftermarket 3rd brake lights, the Crystal Clear LEDs are custom-fitted with a simple plug-and-play design. The light is specifically made to be easily installed by anyone, including novice Wrangler owners All you need is a screwdriver to install your new 3rd brake lights quickly. Application.
The Axial Crystal Clear LED 3rd brake light is specifically designed to be used on 1997-2006 TJ Wrangler models.
- What's in the Box
- Installation Info
Installation Time: (approx) 1 Hour
Difficulty Level:Simple installation for anyone
- Will it fit my Wrangler?
- TJ Rubicon 2 Door - 03, 04, 05, 06
- TJ Rubicon Unlimited 2 Door - 05, 06
- TJ Wrangler 2 Door - 97, 98, 99, 00, 01, 02, 03, 04, 05, 06
- TJ Wrangler Unlimited 2 Door - 04, 05, 06