(approx) 45 Minutes
Simple installation for anyone.
The RT Off-Road Aluminum Valve Cover in red will fit your 1993 to 2004 YJ or TJ with the four-liter, straight-six engine in it. And this is gonna be for those of you that are looking to change up the look of your Jeep a little bit. This is really going to be more of an appearance part than anything else. This is going to fit just like a factory valve cover will. This can be a very easy piece to install. I'm gonna give it a one out of three wrenches. It does come with all of your grommets for your breathers. Also, a new oil fill, new bolts, and a gasket, so it's a very complete kit. But, again, this is really going to be more about dressing up the look and the appearance of your engine than anything else. Products made out of aluminum are going to have a couple of different benefits. Sometimes, aluminum is used for weight saving. Sometimes, it's used because it wicks away heat very well. Other times, it's just the corrosion resistance, and in this case, that's really more what this is going to be about than anything else. This is going to resist corrosion. It's also going to be a pretty nice look where the paint is buffed away on the slats on the top of it, so you have a little bit of that great, shiny metal shining through underneath the red. This is really about changing up the look of your Jeep and dressing up that engine bay. A factory replacement valve cover is going to be less expensive than this one is. This comes in at around $125, but if you're looking for something that's going to dress up the underhood area of your Jeep, that factory valve cover is not going to do it. This absolutely is. So, if you're looking for something a little bit flashier under the hood, I think this is gonna be worth the cost. So, if you're looking to dress up the engine compartment of your Jeep, I would recommend taking a look at this valve cover from RT Off-Road, and you can find it right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
OE Fit and Finish. If you're struggling with valves that don't work as well as they should, make sure to replace them with Valve Cover Kit. Featuring an OE fit and finish, this valve cover will perfectly match your 1993-2004 4.0L Jeep Wrangler stock covers so that you can enjoy a direct replacement that keeps your Jeep looking fantastic.
High-End Design. Thanks to this cover kit, you'll be able to get increased internal clearance for an unbeatable drive both on and off road. The kit also allows for oversized camshafts and high clearance rocker arms so that you can get the customization that you want without worrying you'll impede your ride quality in the process.
Heavy-Duty Construction. Designed from hardcore aluminum, this valve cover kit will easily stand up to the toughest conditions you're faced with on and off road. This means you'll be able to rely on the durability of the valves for a long time to come instead of worrying about when you'll need to replace them again.
Installation. Most people should be able to install this Valve Cover Kit without any real problems, although it could easily take a couple of hours or so to get in properly. The work is mostly tedious and not difficult, but you should have at least moderate automotive skills, or some experienced help. A socket wrench and torque wrench are the main things you will need to successfully complete this install.
Application. This Valve Cover Kit is a perfect fit for all 1993-2004 4.0L Jeep Wrangler YJ and TJs.
Fitment: 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
September 27, 2018
Red valve cover
Very nice valve cover good fit good quality easy install comes with screw kit , gives my motor a great look , thank you very much...Helpful (10)
April 16, 2018
Gasket was not lined up with the bolt holes. And I would prefer a screw cap instead of the rubber cap where you pour your oil in. Had to use original bolts for the other parts to attach too. The cover itself was made well.Helpful (12)
October 14, 2017
Horrible paint job !!!!
Valve cover had a horrible paint job . Chipped paint . And touched up with black magic marker . Was painted yellow first then painted over with black . Grommets didn't fit either . Had to use the old ones . No quality control .Helpful (12)
August 14, 2017
It's what I ordered
Perfect I do wish they offered more of a variety but you can paint itHelpful (12)
July 10, 2017
Crown Automotive Aluminum Valve Covers
Great quality, perfect fit, added a nice touch to my car. Highly recommendHelpful (11)
October 18, 2016
Went on like a glove...looks great ....had to move a few hoses and wiring around, it went on inabout 20 to 30 minutes. I found that the bolts that come with cover were to short and had to use my old ones.Helpful (12)
May 16, 2013
Thank you for the item Good color and perfect fit andHelpful (11)
April 18, 2013
I'm really happy with this product. It's well made and fits great. I will suggest that you purchase another "push in" oil plug, as the one that's included is junk. Also, be sure to puchase new CCV vents too because you'll never be able to reuse the old ones and replacements aren't included. Over all, I'm very pleased and can't image you could find a better valve cover for the money.Helpful (13)
I cant imagine why not, but fitment says this wont fit an 06 rubicon, is that accurate? If so, why not?
This will not fit models other than 93-04 4.0Ls. The 04 and 05-06 4.0L models do differ in fitment.
will this fit a 97 cherokee 4.0?
Yes, Crown Automotive confirms fitment with the 1993-2001 Cherokees with the 4.0L as well.
(approx) 45 Minutes
Simple installation for anyone.
What's in the Box