Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $10,000 in Store Credit! Enter Now >
Spring Savings Are Here! Shop Now >

License Plate Bracket; Black (07-18 Jeep Wrangler JK)

Item J113706
Call a Wrangler Enthusiast at 1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Market Price $62.99 You Save 5% ($3.00)
Our Price

$59.99 (each)

FREE Shipping on orders over $75

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle

Item Options

In Stock  

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      Ryan: This Crown Automotive rear license plate bracket with lamp is for those of you that have a 2007 to 2018 JK that need to replace your factory license plate holder. This is going to do the exact job of the factory one, look factory, function factory. But it's going to be a little bit cheaper than going directly back to your dealership to get a replacement. Now, Jeep built this in kind of a bad spot. If you wanna take your Jeep off road or even if you just park in a tight parking lot, this is hanging off the side of the Jeep. Oftentimes, they get hit, they get cracked, broken. Maybe yours has lasted and it's just faded, and you're going over some of the plastic pieces on the outside of your Jeep to give the Jeep a refreshed look. Whatever the reason, this is going to be, again, something that looks, functions, does everything just like a factory license plate holder, but at a lower price. This is gonna be a very easy one-out-of-three-wrench installation. We'll talk a little bit more about that in just a second. This is a very fair price for a piece that does exactly what it's supposed to do. As for construction, not a lot to say about this. It's going to be a plastic piece that does look just like the factory piece does. It has the lamp built right into it here, so you have your light. It does have the plug here, so it'll plug right into your factory wiring harness. You don't have to do anything weird there, no splicing, no soldering, nothing like that. And it's just gonna hold your license plate, and it's gonna look just like a factory one, but cheaper. This rear license plate holder from Crown comes in at $20. I think that's a very fair price for an option that includes the lamp and the plug. Everything is there for you. There are some other options out there. [inaudible 00:01:29] they're a little bit less expensive, but they're not going to include the light. This includes everything, does what it's supposed to do, All for just $20. Now, I'll have a member of the Install Team show you how you get this installed. Man: First step, we're gonna need to remove our license plate. We're gonna use a flat-head screwdriver for that. That way, we can access the license plate bracket. So now, we're ready to remove our license plate bracket. You're gonna have two screws up here, and you're actually gonna have two screws down at the bottom. Since our bracket is broken, we don't have those two screws down there. So we're gonna use a 7-millimeter socket to take this off. So after you get those two screws out, it's basically gonna be free. You just need to pull it away and unplug it from the back side. So to get this off, we need to pry up on this little locking tab. After you do that, you'll be able to slide that off. And that'll allow you to pull that away, and then disconnect it. So we're gonna push in on that tab there, and then that'll unplug. So before we switch to the new bracket, we're gonna need to take our license plate light housing off. So we're gonna go ahead and just squeeze these two tabs on the side. And once we squeeze those together, that'll just pull out of there. Then, we're gonna go ahead and twist our light, and then that'll come off. So first step when we're installing this bracket, we're gonna need to replace this lens on the new light bulb. After that, we can push it back in, click it in place, and then we're ready to install this on the Jeep. So now that we have our light housing in, you're ready to plug this back in and then screw it back onto the vehicle. After you get your two top screws in, you're ready to install your lower screws. These are a little bit trickier. So the fourth screw is a little hard to see. It's actually right under here. And if you have an aftermarket bumper, it's a little hard to get to. However, I'm gonna get that last one in, and then we'll get our plate back on. So once you have all four of your screws in, you're ready to put your license plate back on. So you're just gonna slide this back and under, and then we're gonna go under these back tabs here. And then, we're gonna put our screw back in. So with everything tightened up, that wraps up our review and install. For more videos like this, check us out at

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation


      • Long Lasting Functional and Aesthetic Excellence
      • For Rear Use Only
      • Durable Black Plastic Construction
      • Replacement for OE# 68064720AA
      • 5 Year Limited Warranty
      • Lens is Sold Separately
      • Fits All 2007-2018 Jeep Wrangler JK Models


      Decoration Meets Purpose. If you were out on the trail and damaged the bracket for your License Plate and need a quality replacement, then Omix-ADA has exactly what you need with their License Plate Bracket .Its generous size and decisive color finishing make it a great alternative to your stock rear license plate bracket. Make this exquisite addition to your jeep and enjoy its elegance and performance for long during your day and night public appearances.

      Long Lasting Functional and Aesthetic Excellence. Omix-ADA took their sweet time to create this cutting-edge license plate bracket. It is made of high-quality plastic for a lightweight effect and longevity. The black finish color accentuates the durability and makes visibility acuter.

      Direct OE Upgrade. This Omix-ADA Rear License Plate Bracket will obviously serve you better than any other premium plate brackets you have used before. It is even cut to precision for a direct OE replacement upgrade.

      Application.This Omix-ADA Rear License Plate Bracket is designed to be used on the 2007-2018 Jeep Wrangler JK Models.

      Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details

      CA Residents: WARNING: Cancer and Reproductive Harm -

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) License Plate Bracket
      • (1) Lamp

      Customer Reviews (47)

        Questions & Answers

        10 More Questions

        Will It Fit My Wrangler

        • JK Rubicon 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
        • JK Rubicon 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
        • JK Wrangler 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
        • JK Wrangler 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18

            Related Wrangler Categories