Dana 35 Rear Axle Ring and Pinion Gear Kit; 4.11 Gear Ratio (87-07 Jeep Wrangler YJ, TJ & JK)Find parts that fit my vehicle

The Master Key to Your Rear Axle. When the rear axle of your 1987-2007 Jeep Wrangler YJ, TJ and JK Models needs a little TLC, you need a kit that's going to set you on the right foot. And no one can do that better than the Omix-ADA Dana 35 Ring Gear and Pinion Master Kit - 4.11 Rear. With its sturdy steel construction and long-lasting parts, you're going to get a full revamp of your axle's inner workings.

Built to Last. These pieces are specifically designed to fit your Wrangler's Dana 35 axle. And to ensure maximum quality, long-lasting steel has been used to craft the ring and pinion, along with the hardware.

Installation. This is a very thorough installation process, and it's very highly recommended that you have this done professionally. If doing it yourself, you will need specialized tools, hand tools, jack stands or a car lift, and about a day's worth of free time.

Warranty. This kit is protected by a 5 Year Limited Warranty against material and manufacturer's defects, like all Omix-ADA products.

Application. This Omix-ADA Dana 35 Ring Gear and Pinion Master Kit - 4.11 Rear is designed to fit 1987-2007 Jeep Wrangler YJ, TJ and JK Models.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov