Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 In Store Credit Enter Now

How to Install Condition Zero Pistol Mount (07-17 Wrangler JK 4 Door) on your Jeep Wrangler

Installation Time

1 hours

Tools Required
  • 18mm wrench and/or socket
  • 1/2" wrench and/or socket
Extreme Terrain
Shop Parts in this Guide

Step 1

Slide your seat as far back as possible. Remove the bolt nearest the console on either the driver or passenger side (this should correspond to the mount you purchased) You will need an 18mm wrench for this step.


Step 2

Insert the mounting plate as shown and replace the existing bolt. Use the supplied bolt to attach the rear of the brace underneath the seat (not pictured). You will need a 1/2” wrench and socket for this step.


Step 3

Attach holster to mount using provided Velcro strips. Ensure the Velcro strip is positioned on the desired side of the mount (generally the leg facing side).