(approx) 1 Hour
Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Beef Up Your Ride. When you want to add a nice and stylish mod to your 1997-2006 TJ, choose the Bushwacker Textured DiamondBack Six Piece Set for Flat Style & Factory Flares. This armor set comes with six pieces that are custom styled o work with your flat fender flares or factory flares. When you want to have the look of a tough military like Jeep, you can achieve it with this armor kit. The kit comes UV protected, so that it will never fade while on your vehicle. The easy, no drill installation makes the process a breeze and you will enjoy the OEM matte black finish that guarantees it will match your Jeep. This armor set is made from dura-flex 2000 TPO, so it is durable, strong, and will not rip off, even in the most extreme conditions. The set is backed by the Bushwacker promise and limited lifetime warranty that you have come to know and trust by the brand. The kit includes corner guards, rocker side panels, front frame cover, and tail gate sill covers.
Dura-Flex 2000 TPO Construction. Constructed from Bushwacker’s dura-flex 2000 TPO, you can expect your new set to boldly provide protection to your Jeep where you need it the most. These accents are finished in a diamond tread plating that provides you with the aggressive and serious look you want. Each piece is finished with a UV protection that prevents chalking and fading.
No Drill Installation. All of the pieces in this six-piece set are designed to attach to your Jeep with 3M automotive tape and NO drilling is required. You do not need to make any additional modifications and installation is considered to be simple and will take approximately one hour to complete. All hardware and pieces needed for installation are included in the kit.
Warranty. Bushwacker backs this kit with a lifetime limited warranty for full value and peace of mind.
Application. The Bushwacker Trail Armor Six Piece Set is designed for use on 1997-2006 Jeep Wrangler TJ models equipped with factory or flat style flares.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
January 13, 2019
Good fit event on a YJ, with small modification.
Modifying these to fit the YJ with Flares was easy. As the Flares and the panels are the same height. All you have to do is trace the flare and cut it using a saw. I used a bandsaw, but you could easily use a jigsaw or coping saw, as these are good for cutting arcs. You will need some extra emblem tape to attach these to the vehicle. I pots a photo as well.Helpful (4)
December 24, 2018
Made of plastic but for the price you can't beat it to cover up those ugly holes from the stock fenders.Helpful (5)
November 03, 2018
These fit perfectly and took around 30 minutes to install. Keep in mind, these are only plastic and offer only minimum protection. I wanted them more to cover up a rust spot and not to really protect the body from damage.Helpful (5)
August 20, 2018
bushwacker rocker panels
fits perfect..easy to install..great look..glad I did it.Helpful (6)
August 17, 2018
Nice look and quality is good. Would buy there products again. Bought the side rocker panels and front fender panels.Helpful (6)
August 06, 2018
Look great, mine are a half inch too short.
Maybe I did something wrong, or they're designed for bushwhackers flares, but each side of mine were about a half inch too short. Other than that they look awesome. I plan on eventually getting the pocket flares so maybe it'll look perfect then.Helpful (6)
June 23, 2018
They are great, very easy to install and look good!Helpful (6)
May 22, 2018
The front cover didn't fit it was not long enough. The rear cover worked good.Helpful (12)
April 02, 2018
2002 Jeep side rocker panels
They replaced my old worn out ones and we're a perfect fit. But I can't say that for my rear ones. Should have sent them back. Had to drill new holes as on the license plate one as nothing came close to fitting. I still like them, just wished it came with the grommet to hold the screws fir the plate. It seems the extra dollar they would spent making them to be a easier fit. Would rate the back ones a two star.Helpful (7)
January 15, 2018
Easy to install looks great....................................Helpful (7)
Will this fit a 2006 Jeep Wrangler unlimited?
Due to the body of the the TJ Unlimited being longer than the Sport, the Bushwacker Textured DiamondBack Side Rocker Panels - Pair (97-06 Wrangler TJ) are too short to fit on the the 03-06 LJs and Unlimiteds.
What are the lenght and height of these? Thank you.
These are about 4.5" high and we do not have the exact length but are designed to be between the fender flares.
Do they have these for a 1994 YJ I need to cover up holes from my stock fenders :( or why will these not fit a 1994?
These items would not fit properly onto a 1994 Wrangler due to slight differences in body styling and item manufacture. An equivalent item,item J14665, is available for purchase for a 1994 Wrangler.
Do the factory side steps need to be removed for installation?
Removal of the factory side steps would assist with installation but is not a required step. As these itemsdo not bolt on and are installed using 3M tape, there would be no conflict to installing both items.
Will this side rocker panel cover all the holes left over from removing stock fenders replacing with Barricade tube fenders for an ‘06 TJ?
Yes these Side Rocker Panels will cover any holes on the rocker panel.
At this time, we do not offer them in a pre-painted application. We would recommend having them painted by a paint/body shop.
Yes, the Bushwhacker Textured Diamondback Side Rocker Panels will cover any holes on the rocker panel.
We do not offer a tailgate guard similar to this from Bushwacker but we do offer something similar from Rugged Ridge for your tailgate. It is the Rugged Ridge Black Plastic Rear Tailgate Sill and can be found here: https://www.extremeterrain.com/rugged-ridge-diamond-black-tj-1165015.html
Hello! The Bushwacker Textured DiamondBack Six Piece Set for Pocket Style Fender Flares will not fit a 2004 Unlimited LJ
The Bushwacker Textured DiamondBack Side Rocker Panels - Pair (97-06 Wrangler TJ) do not stretch the entire length of the rocker panel and stop at the fender flares as shown in the image.
The Bushwacker Textured DiamondBack Side Rocker Panels - Pair (97-06 Wrangler TJ) are about 4.5" high from top to bottom.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box