(approx) 15 Minutes
Simple installation for anyone.
$189.99 (pair)FREE Shipping Market Price $218.49 You Save 13% ($28.50)
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Merideth: If you want some extra protection for your 2021 or newer Ford Bronco, and some off-road appeal. In the meantime, these Bushwacker Trail Armor Rear Corner Guards can be a great pick. Now, this set will form fit to the rear corner of your Bronco offering solid protection to that area for many hits or scratches from the trail, or even just in the parking lot. Now, these will also give a good contrast and more of an off-road look with the OE textured finish, a smooth body line, and great fitment if you're looking for a change in style to the back of your truck. Now, these will be made of a top TPO construction, which will form to the side of the Bronco, while being able to take any lighter hits. Now, these will have an OEM textured appearance to them, which will match with any factory plastics, and add a nice contrast to the truck, especially with any bright pink colors.And the guards will be attached with heavy-duty 3M adhesives. So, you can rest assured that you won't have to make any modifications to your brand-new Bronco. But these will also hold up and stay in place for the long run. When it comes to price, this set will come in at roughly $200, which is pretty average for this style of Armor. Now, again, these will give you that form to design and a tough look to the back of your truck without any permanent modifications. Now others on the page will usually stick to these same specs but will have slight differences in the finishes or the materials. Now, I think if you're just looking for some solid protection and that off-road look, then these will be a great pick. Now, install will be a super easy one out of three wrenches on the difficulty meter, taking you about 15 minutes to get the job done with no tools at all, besides a cleaning solution and a rag. Now, at this point, we can head over to the shop and check out a detailed breakdown of that install. So, that's gonna wrap it up for me. Let's jump into it.Man: Hey, guys, I'm gonna show you how to install our corner guards here on our '21 Bronco. So, let's get started. So, the first thing we're gonna do, I got both our corner guards here out on the table. We're gonna flip them over and look, and you will see that they have double-sided tape all the way around already on these, like, this one here. And what we're going to do is we're going to take the tape, you're gonna pull back the corners, and we're gonna fold it over like this. And you're going to fold it so that it goes to the outside of the corner guard like this. So, that way, once we get it on our vehicle, and we get it where we want it, we will be able to pull the backing of the two face tape off. This one here in the center, we're going to remove this one because we're not gonna be able to get to that, but all the rest, we're going to be able to just pull them up.So, you're gonna wanna make sure you do it on every piece that you need to do so that you can pull it off so that you can stick this on. So, now that you got it all taken care of like this, and we have the red tape sticking on to the outside, you're gonna wanna just repeat the same procedure on the opposite one, and we'll start installing our corner guards. So, now that we have everything pulled back, we're gonna take our corner guard and get it in place. And once we kind of get it stuck to where we want it, so you're just gonna wanna get your red piece of tape and pull on this, pull this all the way over, and you're gonna do it all the way around all the edges. Now, on ours here, since we're gonna be removing this, I'm actually not gonna pull this off, because we're just doing it as a demonstration. But that's what you're gonna wanna do.And once you pull it off, then you're gonna wanna just go around and push very securely all the way around the corner guard to make it stick. Now, you're just gonna want to repeat this whole installation procedure on the opposite side. That wraps up this review and install of our Bushwacker Trail Armor Rear Corner Guards for '21 and up Broncos. Thanks for watching, and for all things Bronco, keep it right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Corner Protection. Bushwacker Trail Armor® Rear Corner Covers provide extra protection to the vulnerable rear corners of your Bronco to help prevent dents, dings and scratches. Specifically designed to stand up to the wear and tear of off-roading and trail riding, these Rear Corner Covers will add a bold, rugged appearance to your Bronco's exterior.
Rugged Construction. Proudly made in the USA, Bushwacker manufactures Trail Armor Rear Corner Guards from a tough thermoplastic olefin (TPO) material for rugged durability. Completed in a UV treated, textured black finish, these Rear Corner Guards will look great for years to come.
Simple Installation. No drilling or permanent modifications are required for installation. This set of two Rear Trail Armor Rear Corner Guards are designed to simply install with the supplied clips and 3M double-sided automotive bonding tape. Installation is quick and should only take about 15 minutes to complete.
Application. These Bushwacker Trail Armor Rear Corner Guards are designed to fit 2021-2023 Ford Bronco models. Driver and passenger side are included.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 15 Minutes
Simple installation for anyone.
What's in the Box
10 More Questions