FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Black Forest Gear Cargo Slider (11-18 Wrangler JK) on your Jeep Wrangler
Note: This product requires a base plate (such as the Black Forest Gear Cargo Base Plate) to be installed already.
Installation Instructions
1. Carefully open the package using a box cutter or knife (Figure A) and ensure the hardware is included and undamaged.
2. Ensure the front and rear base plates (previously installed) are level/equal height by adjusting the leveling feet (Figure B).
3. Place the slide assembly into the mounting position (Figure C). Ensure the release handle is facing toward the rear of the vehicle.
4. Extend the slide assembly by rotating the release handle upward and pulling the tray out slowly (Figure D).
5. Using the supplied fasteners, connect the slide assembly to the base plates, working from the front of the vehicle and moving to the rear (Figure E).
6. Tighten all fasteners (Figure F).
7. Slide the tray back into the closed/locked position to ensure smooth travel of the slide assembly (Figure G).
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 02/22/2018
