How to Install Bestop Upper Door Sliders for Factory Soft Top - Black Diamond (97-06 Wrangler TJ) on your Jeep Wrangler

Before you begin installing this door assembly, read all instructions thoroughly. If you have questions concerning this product, please contact your authorized Bestop Dealer or call our Customer Service Department, Monday-Friday 7:30 AM - 5:00 PM (MST) at 1-800-346-3910 or 303- 465-1755 in Colorado.

Step One: Slip the pins on the bottom of the door into the sockets in the lower door. Make sure that the pins are well seated in the sockets.

Step Two: To open the window, squeeze the release button and slide the window open.

Your doors are made of the finest materials available. To keep them looking new and for the maximum possible wear, they will need periodic cleaning and maintenance.

Washing: The fabric should be washed often using soap, warm water and a soft bristle brush. Rinse with clear water to remove all traces of soap.

Water: Seeping through at the seams may be stopped by applying 3-M Scotchgard® on the inside of the seams. Rips in the fabric may be repaired with Bondex® iron on patches. Iron the patches to the Inside of the top, carefully following the Bondex® instructions.