How to Install Bestop Rear Seat Cover - Tan (2007, 13-18 Wrangler JK 4 Door) on your Jeep Wrangler

1. Begin by unzipping the small seat's backing (Figure A).

2. Slide the small seat's backing over the small seat back (Figure B).

3. Open the Velcro in order to slide the small seat backing over the headrest (Figure C).

4. Align the small seat backing over the small seat back (ensuring the seat release is open (Figure D).

5. Unzip the large seat backing (Figure E).

6. Open the Velcro in order to slide the large seat backing over the headrest (Figure F).

7. Line the unzipped portion up around the seat belt (Figure G).

8. Zip the large seat backing up around the seat belt question (Figure H).

9. Slide the seat covers through the slip for both seats (Figure I).

10. Zip the small seat backing back up (Figure J).

11. Attach the seat backing to the slip.

12. Slide the lower seat over the larger seat (Figure K).

13. Slide the lower seat over the smaller seat (Figure L).

14. Run the straps underneath both seats and thread through the plastic buckles.

15. Slide the headrest cover onto the headrest (Figure M).

Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 07/10/2018