Belltech 3 to 6.50-Inch Height Adjustable Rear Lifting Coil-Over Kit (21-24 Bronco w/o Sasquatch Package, Excluding Badlands, First Edition, Raptor & Wildtrack)

Description. Need the ultimate in ride quality, handling, and ride height adjustability? Belltech coilover systems are the answer, providing complete height adjustable replacement shocks and springs in an application specific complete coilover unit. Belltech now offers a complete solution for the front end of your strut equipped Truck or SUV. Increase grip, reduce body roll, all while retaining the daily driven comfort you require. Each kit consists of two threaded large 60mm body performance dampers with the option of independent compression and rebound damping force adjustability. Belltech coilovers come preassembled with matched performance coil springs, Aluminum spring perches, progressive rate open cell bump stops, and plastic dust boots.

Fits: 2021+ Ford Bronco 4WD ; 3-6.5" Rear Only

Your new Ford Bronco has an astounding ability to adapt to your needs, a memorable appearance and remarkable capability. One of its most exciting features is its easy customization and capacity to evolve into a truly unique adventure vehicle with perfected modification to suit your lifestyle. Belltech loves to be a part of your vehicle customization, creating off-road machines with phenomenal presentation and versatility. Our 15329 rear 3" to 6.5" lift coilovers are combined with their front counterparts in our 152600HK complete 4" to 7.5" lift kit. Elevating your Bronco this much results in a more aggressive, exceedingly appealing look. In addition to catching attention, your Ford will also obtain greater ground clearance and room for large tires and wheels, which can significantly increase your contact patch. Belltech coilovers are engineered exclusively for the vehicle they are meant to enhance and are tested in varying conditions, so when we say our coilovers will improve vehicle safety, boost ride quality, enrich performance and give you the ultimate driving experience, it has already been proven. Belltech coilovers contain large-bodied, 2.4" (60mm) Trail Performance dampers that use a low-friction design and are preset for ideal damping. Our 35mm independent and rebound compression valves result in ideally refined low and high-speed compression. The damper bodies are constructed of galvanized steel and zinc-plated, making them quite durable and rust-resistant. For increased strength, each piston rod is 20mm in diameter and is made of hardened chrome. To create height adjustability, Belltech uses a threaded damper body and spring perch. The perch is easily moved up or down the threads and set in place exactly where it is desired. Once the coilover height is customized, it is also important to set the adjustable bump stop engagement. Belltech uses a progressive rate polymer, open-cell, bump stop, and packers to coordinate the best possible bump stop engagement. Belltech coilovers also contain a main spring and helper spring. Both springs are made of cold-formed high tensile steel and powder coated, so they are protected from dirt and debris. The linear spring is made with the most desirable spring rate for the Ford Bronco and Belltech engineers are sure to test it on a vehicle as-is and fully loaded with customized gear. The helper spring keeps tension on the main spring when the suspension is at full droop, so it stays properly seated in place. To reduce noise and vibrations, each coilover is equipped with a double wall, high durometer vulcanized rubber bushing. To keep the piston rod pristine and protect it from debris, we apply a plastic dust boot, and for easy installation, the OE top mount is used. Get suspension you can count on with Belltech Trail Performance coilovers.

Fitment:

• 2021 Ford Bronco
• 2022 Ford Bronco
• 2023 Ford Bronco
• 2024 Ford Bronco

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov