How to Install Barricade Winch Cover on your Wrangler

Installation Instructions:

1. Before:​

2. Unpack the Barricade Winch Cover and remove any stickers. Gently lift your winch cables up and away from the front grill of the Jeep. Fully open the bottom of the Barricade Winch Cover by releasing and relocating the securing device on the string to the end of the string. Place the Barricade Winch Cover over the Barricade Winch and pull the cover down around all sides of the winch.

3. Pull the draw string tight.

4. Optional: Tie a knot in the drawstring cord to prevent it from loosening during highway driving.

5. Optional: Attach drawstring to bumper shackle for extra protection during highway driving.

6. After: