(approx) 30 Minutes
Simple installation for anyone.
$134.99 (pair)FREE Shipping
I'm Ryan from ExtremeTerrain.com and this is my review for the Barricade Tail Light Guard fitting all 2007 to 2016 JKs. These are for those of you who like the off-road or safari look that a tail light cover gives you and want some light protection against brush and tree branches. These however will not give you a ton of protection if you plan on bouncing your Jeep off of trees or rocks on the trail. In fact, there are a lot of people that will say having a tail light guard in place and having a heavy impact to it will actually cause more damage by transferring the impact into the tub causing metal damage instead of just breaking a tail light. These are a little bit more expensive than some of the other tail light guards on the market but they also have a little bit of a unique design. So depending on what you're looking for on your Jeep, this may be a nice option. These tail light guards do a nice job of wrapping around the light so they do give that light protection to both the side and the rear of the light. Again these are going to help brush away light brush and tree branches but if you do hit them pretty hard, they are going to transfer that impact into the tub causing a good bit of damage. These are built of a metal alloy material and are covered in a textured black powdered coat finish so they're going to match those other aftermarket parts you have on your Jeep and a lot of your factory black plastic accents. These are designed to be completely bolt on so the installation is really straight forward and there's no need to drill anything. Which also means that they're completely reversible. So if you ever decide to take them off you can do it without any permanent modification to the Jeep. This kit includes both tail light guards and the rubber isolators so you'll have everything you need to get these installed on your Jeep. Because these are bolt on, the process is really simple. All you need to do are remove the screws that hold the tail lights onto the Jeep. There are four screws per tail light. On the outside of the vehicle there are two longer screws that hold the tail light to the Jeep itself and on the inside are two shorter screws that hold the two halves of the tail light together. Once you have all four of those screws removed, you can insert the rubber isolators then put the tail light guards in place using those factory screws. The whole process shouldn't take you more than a half hour and the only tool you're going to need for this installation is a Phillips head screwdriver. These are a little bit of a unique design as far as a tail light guard goes. A lot of other ones are more of a tubular design instead of the plate design of these. Now these are also a lot more expensive than a lot of other tail light guards on the market. So if you like this style and the design of these and you have the budget for it, this is a good way to go. However, if you don't have the budget for these or you're looking to save a little bit of money because these are more of a visual mod than a performance mod, then there are some other options out there even if they're a little bit different design. So if you like the look of a tail light guard and you want the light protection from brush and tree branches on the trail, this is a nice option to take a look at. These work well as standalone tail light guards or as a kit of other light guards on your Jeep to complete the look. As I mentioned, these are going to be more expensive than some of the other tail light guards on the market but they do have a little bit of a unique style that you won't find in a lot of other places. So that's my review of the Barricade Tail Light Guard for the all 2007 to 2016 JKs that you can find right here at ExtremeTerrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Extra Protection. Protect your Jeep Wranglers tail lights from damage on the trail with a set of Barricade Off-Road Tail Light Guards. These Guards not only protect your tail lights from brush and other hazards, but also give your JK a rugged off road appearance.
Heavy Duty Construction. Manufactured from a heavy duty metal alloy, these Barricade Off-Road Tail Light Guards are completed in a durable textured black finish for aggressive good looks and long lasting corrosion resistance.
Easy, Bolt-on Installation. Barricade Off-Road Tail Light Guards are engineered to be a direct bolt-on upgrade using just basic hand tools. There is no drilling required, these Tail Light Guards install using the existing holes for a clean straight forward installation.
Application. This set of two Barricade Off-Road Tail Light Guards are specifically designed for use on 2007-2018 Jeep Wrangler JK models. Includes driver and passenger side guards.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
May 14, 2020
Bought as olen box item and very surprised how small the damage was and saved so much. Thanks guys for the great deal.Helpful (0)
January 06, 2020
perfect for my needs
item was great, now when I am backing up into a crowd or an urban obstruction, i'm not worried about my taillights getting damaged. the powder coat finish makes it so that blood washes right off, too. EXCELLENTHelpful (1)
December 11, 2019
The look is nice. Very easy to put on. Took 20 minutes to install.Helpful (1)
November 10, 2019
Love the look of these!
The tail guards really make my wrangler stand out! I’m in love with how they look!Helpful (1)
September 05, 2019
Nice tail light guards
Nice Tail light guards, they fit and look nice. As far as protection they’ll protect the plastic, but if you get hit hard they will dent into the metal. Bang for your buck they’re kind of expensive, but I think they do a better job than the bar ones. They fit nice, except the holes for the inside screws are a little bit too big for the screwheads so I had to add washers so they would not pull through. I would recommend these.Helpful (1)
March 18, 2019
Solid still 2 years later
These are sleek and minimal and look good. They’ve held up extremely well over 2 years, still like new.Helpful (1)
February 21, 2019
I Recommend These Tail Light Covers.
If you're wondering if you should buy these tail light covers, you should. You won't regret it, they are great quality and they make your Jeep look really nice too. They are a very good accessory to add to any Jeep.Helpful (3)
January 20, 2019
Great fit, easy install. Looks Awesome. Package arrived on time and customer service was super.Helpful (4)
December 22, 2018
Barricade Tail Light Guards
Nice enough, but skinned and banged up in the box, lighter material than I envisioned, Look nice, but I guess I expected more for the price. Have bought Barricade products before and was impressed, these are less impressive. Definitely could be packaged better and delivered in better shape, yes I know it's a Jeep, blah blah, for $100 I'll skin them up myselfHelpful (5)
July 30, 2018
First pack had one scratched bad and only 4 rubber bumpers. Customer service awesome. Sent back and got new set. Still only had 4 rubber bumpers and lightly scratched. I put them on anyways. Really like the material and look, they are very sturdy.Helpful (7)
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box