Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
Win $4,000! Enter Daily

How to Install Barricade Side Marker Guards on your 2007-2017 Jeep Wrangler JK

Installation Time

10 minutes

Extreme Terrain
Shop Parts in this Guide

Contents:

(2) - side marker guards
(1) - alcohol pad


It is recommended that you have an additional person available to help during this installation, parts can be awkward to hold and support by yourself. Block wheels and set parking brake before beginning work. Disconnect the negative (-) batter cable.


Clean off the marker lens with the supplied alcohol pad. 


Lay the marker guard face down and remove the 4 red 3M backings from the back of the guard. 


Install the marker guard onto the lens, then press along the edges of the guard to properly seat the tap around the circumference.