Customer Reviews (17) Write a Review

Overall Rating 4.1

out of 5 stars

• Fit 4 4
• Bang For Your Buck 4.235294 4.2

• 5/5

  March 11, 2019

  Jeep Fenders

  Great product, very easy to install, looks good on Jeep

  David

  Year: 2002Submodel: Wrangler

  Helpful (1) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  February 18, 2019

  Fender kit

  Beautiful, practical, high quality, definitely I loved it

  MELANIET

  Year: 1998Submodel: Wrangler

  Helpful (4) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 4/5

  January 20, 2019

  2006 wrangler

  I bought these for my daughters Jeep because the wider tires would not pass our PA inspection. Installation was not bad. The hardest part was removing the stock flares. One minor issue was on one of the stone guards / extension piece, one of the holes was not lining up. I just drilled another hole, and is was all good.

  Gil

  Year: 2006Submodel: Wrangler

  Helpful (6) Thanks for your input!

  • Fit 4

    4

  • Bang for your Buck 4

    4
• 4/5

  July 07, 2018

  Instructions

  Instructions were of the type associated with Chinese diagrams. Though the fenders fit correctly as advertised, it took quite a bit of head scratching to figure out a method for attaching them.

  RogerK

  Year: 2002Submodel: Wrangler

  Helpful (7) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 4/5

  April 30, 2018

  Not perfect; not bad

  These were simple enough for a non-auto inclined person to install however both rear fender flares did not cover the stock lines in the paint. All flares lined up with existing bolt patterns EXCEPT rear passenger. I've got an exposed hole visible now. Good look but disappointed that they don't line up for the money spent.

  kTimmons

  Year: 1997Submodel: Wrangler

  Helpful (9) Thanks for your input!

  • Fit 3

    3

  • Bang for your Buck 4

    4
• 5/5

  April 01, 2018

  Looking Good!

  Easy install and fits great! Hardest part, is getting the led ones off the vehicle.

  TerryPlein

  Year: 1999Submodel: Wrangler

  Helpful (9) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 1/5

  December 11, 2017

  2005 tj

  Just spent the afternoon installing. Not a perfect fit. Hard brittle plastic. Hardware is not good. Had numerous customer service shipping issues or I would of bought another brand.

  SteveP

  Year: 2005Submodel: Wrangler

  Helpful (8) Thanks for your input!

  • Fit 1

    1

  • Bang for your Buck 1

    1
• 3/5

  November 13, 2017

  Underwhelmed

  Was not super satisfied with the product. The hardware was cheap and the kit came with not enough trim to even finish the 4 large fenders. Customer service was excellent and sent me more but I still was not satisfied with the fit or look, especially for the money.

  Andrea

  Year: 2006Submodel: Wrangler

  Helpful (9) Thanks for your input!

  • Fit 3

    3

  • Bang for your Buck 3

    3
• 4/5

  August 22, 2017

  Good but not great

  Good overall product but hardware was really cheesy. I upgraded to larger hex head stainless hardware and it look much better than the plastic hardware. Also the instructions were terrible as they were a copy of a copy of a copy from years ago and you couldn't see any pics with "important" details.

  DonM

  Year: 1999Submodel: Wrangler

  Helpful (9) Thanks for your input!

  • Fit 3

    3

  • Bang for your Buck 3

    3
• 4/5

  March 20, 2017

  2003 Jeep Wrangler install

  Well made so I'm pleased with the quality. The front Barricade fender kit fit perfect. No lines from the stock fender and the bolts whole were perfect. The rear were very close but not perfect. I started installing the screws from the front to the rear, leaving all of them loose. The very last rear screw did not fit. I couldn't see the hole in the fender to put the threaded screw through so I used a rat tail file to move the hole in the plastic fender. It wasn't difficult but something I would have rather not done. I used an oversize washer on the screw to keep it the fender secure to the jeep body. The rear fender did not cover the same area as the original fender, so a line will be seem. 1/8" inch all around showing from new fender compared to the stock fender. All in all, I'm still satisfied with the purchase. As stated previously, they are made well and at a good price. I'd purchase them again if needed. One last note, save your old screws and reuse them because they are much better than what comes in the kit. Phillips screws just don't cut it and I don't think they were stainless. ?? Torx screws came with my jeep as original screws and are stainless steel. Very good quality so put them back in.

  DavidB

  Year: 2003Submodel: Rubicon

  Helpful (8) Thanks for your input!

  • Fit 3

    3

  • Bang for your Buck 4

    4
• 3/5

  December 21, 2016

  Fender flare quality ok.

  I have a 2006 TJ. Even though the flares are listed as an exact fit they are not. I had to redrill holes for the front and rear flares on the driver side. The flares also don't cover the same surface area of the stock flares so you can see where the back flares used to be on the Jeep. Lastly, the little black caps are more than a pain and are really cheap. I had 9 caps come in disfigured, so they don't fit well at all and keep coming off. I cannot go back to the stock flares because they were so worn out. Working with what I have. These flares do look better because they are new. I am going to replace all the hardware with black screws and washers which will get rid of the cap problem.

  Danno

  Year: 2006Submodel: Wrangler

  Helpful (8) Thanks for your input!

  • Fit 2

    2

  • Bang for your Buck 3

    3
• 4/5

  December 09, 2016

  Very good choice

  I find this flare to be almost everything I had hoped it would be. The plastic is strong and has stood up well. It adds just the right amount of aggression to the look of my jeep without going overboard. It was also very easy to install myself. It lines up perfectly with the holes from the original flares. My only negative is the plastic rivet caps. I was worried they'd look fake but luckily they do look real and cool however, as I was afraid when putting them on, I've already had two fall off and now they no longer match the others. I even super glued all of them on because I figured this would be a problem. I'll be looking into replacement caps but wish there was a more secure way (or that the actual screws just had a more impressive look to them.) Overall, incredibly happy and would definitely recommend this brand and style to anyone else.

  dk2006

  Year: 2006Submodel: Wrangler

  Helpful (9) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  March 30, 2016

  Good buy!

  The fenders look great and bolted up without any issues. Only complaint is rear fenders do not match same outline that the factory fender did. So there is a line where factory fenders rubbed paint. They still look and work great.

  Swamplife

  Year: 2001Submodel: WranglerGreenville, NC, USA

  Helpful (8) Thanks for your input!

  • Fit 4

    4

  • Bang for your Buck 5

    5
• 4/5

  March 30, 2016

  Great flares ..... but screws and caps

  You can't beat these for the price, They are a nice deep black. The only problem I have are the screws and cap. They seem flimsy I was expecting Hex bolts but I got Phillips bolts. Other than that they are pretty sweet!

  JCinTheOC

  Year: 1997Submodel: WranglerSoCal

  Helpful (8) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  February 29, 2016

  I like the look of the installed flares

  once through the tear out of the old flares things went pretty smoothly. I used red lock tite on the bolts. the covers for the bolt heads gave me a small problem, I found if you center the covers as you tighten the bolts they close better and not over tightening them helps as well

  zaphodbeeblebrox

  Year: 1997Submodel: WranglerSeattle, WA, USA

  Helpful (8) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 4/5

  January 11, 2016

  Great product. Just one little issue.

  The quality and price was fantastic. The only thing I didn't like were the mounting screw covers. The were a plastic snap cover that hides the stainless steel mounting bolt heads. The covers are made to look like hex head bolts. I am sure by the end of this summer those plastic cap heads will pop off. Thinking about replacing with aftermarket true black anodized hex head bolts.

  CwoodDad

  Year: 1998Cottonwood, CA 96022, USA

  Helpful (10) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  January 11, 2016

  These fended flares fit perfectly

  Easy to install look great and fit perfectly to my tj

  David96

  Year: 2006Staunton Va, USA

  Helpful (9) Thanks for your input!

  • Fit 5

    5

  • Bang for your Buck 5

    5