How to Install TruShield Rear Overhead Net on your Wrangler

1. Lay the net out on a flat surface with the label facing up and toward you.
2. The label will be facing up and just behind the front passenger seat when installed.
3. All the straps should go under the roll bar and back to the buckles to connect.
4. Adjust as necessary.
When using this net with the LJ-1PW (LJ One Piece Wraparound Net), connect the rear most strap of the overhead net to the upper most strap of the wraparound net with the Velcro strips provided.
Note: Roll cages expand and contract with temperature changes. Occasional tightening may be necessary for a day or two and should be done in the cool of the morning.
Tip: To get the straps extra tight, grab hold of the strap ends with pliers when pulling.
Tip: To conceal the strap ends, push them back through the buckle and roll them up.