(approx) 2 Hours
Simple installation for anyone.
$199.99 (pair)FREE Shipping
Open Box from $52.24
Hey, guys, it's Sarah from ExtremeTerrain.com. And today, we have a review and install of the Barricade HD running boards, fitting your '18 and newer four-door Jeep Wrangler JLs. These running boards provide a secure stepping surface in all weather thanks to the rugged non-slip step pads. These running boards feature a mild steel construction with a textured black powder coat finish, and plastic end caps as well as step pads.And because of the way these mount to the Jeep, they're not gonna provide as much protection as, say, a rock slider would. But if you're looking to just get a nice wide step on your Jeep, these will get the job done.Coming in at around $200, these are a budget friendly way to add a step to your Jeep. I'm giving this install one out of three wrenches on the difficulty meter. It can be done in approximately two hours, and features a direct bolt-up install. Okay. So, with that said, let's jump right into our install.For this install, we used a 13-millimeter wrench, small extension, a 5-millimeter Allen socket, 13-millimeter socket, a ratchet, and an impact gun.All right. So, the first step in our install is to bolt up the brackets to the pinch weld in the bottom of our Jeep. Line up the outside of the bracket with the pinch weld, grab the included hardware, and we're just gonna get these hand-tight for now so that we can get the bolts in the bottom. Again, just because there's a good amount of adjustability in the bracket, we're gonna leave these hand-tight until we get the bolt into the bottom of our Jeep. Repeat those steps with the other two brackets.Now, underneath our Jeep, we can thread in our bolts to the underside. Grab your 13-millimeter socket and tighten this down. Using a 5-millimeter Allen key socket and a 13-millimeter wrench, tighten down the bolts at the pinch weld. Repeat that process with the other two brackets.With all three brackets bolted in place, we can now grab our step and lay it on top of the brackets. Now, there is a good bit of adjustability with this step. So, go ahead and take a look and set it right about where you want it to go. We can get underneath and bolt it down. Grab the included flat brackets, insert them into the running board, and line them up with the bracket that we just installed to the Jeep. Grab the included hardware and get these bolted up. Grab your 13-millimeter socket and tighten this down. Repeat that process with the other two brackets.So, that is going to do it for the review and install of our running boards. Remember, for all things Jeep, keep it at ExtremeTerrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Specs & Installation
No-Slip Stepping Area. If you or your passengers are having a difficult time entering and exiting your Jeep Wrangler, perhaps it’s time for you to get these Barricade HD Running Boards. These Running Boards provide a convenient stepping area, allowing you to safely enter and exit your Wrangler. As an added benefit, these Running Boards double as side protection, keeping road debris from damaging your Wrangler’s paint job.
Mild Steel Construction. These Barricade Off-Road HD Running Boards are manufactured from high-quality mild steel. This mild steel construction offers a high level of strength and durability allowing these Running Boards to handle heavy loads and punishment. To protect these HD Running Boards from oxidation and corrosion, Barricade applies a textured black powder coated finish that also adds to your Wranglers rugged good looks. As part of the final assembly Barricade installs a set of non-slip step pads.
Simple, Bolt-on Installation. Barricade Off-Road engineered their Running Boards to be a direct bolt-on upgrade using just basic hand tools, so there is no drilling or cutting required for a clean straight forward install. All of the necessary hardware is included for installation, making this an easy job for anyone to complete in under two hours.
Application. These Barricade Off-Road HD Running Boards fit 2018-2020 Jeep Wrangler JL 4 Door models. Driver and passenger side included.
Fitment: 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 07, 2020
Happy Wife Happy Life
wife having issue stepping into Rubicon. This product seemed like it would take care of the issue for a reasonable cost. Was able to install easily, instructions were clear. took about an hour from opening the box to clearing trash. Look good and she felt she could get into the jeep far more easily. Would use these again. Wait I did use these again, same style and brand have been on my 94 YJ for several years confident that I will be happy with these for years as well.Helpful (0)
November 28, 2019
Drop step running boards look great on my Jeep. Easy install too.Helpful (1)
October 05, 2019
Love the new items we just got for our new Jeep! Need to get the lift set up for some topless travel.Helpful (2)
September 13, 2019
Clean and simple
20 Minute installation (after you dig out your tools). Looks better than factory. Only minor complaint is the bolts are "steel". I have a blacked out Granite JLU and I just cut a 3/4 hole in some cardboard and painted the bolt heads black.Helpful (2)
August 26, 2019
Easy. Durable. Value.
Cool sleek fit. Easy install. Only took about 2 hours and I'm really new to working on my jeep as this was my first modification. Definitely feels more sturdy and stable than the MOPAR running boards.Helpful (1)
July 27, 2019
Great running boards
These were easy to install and look great! My only complaint would be that the bolts that hold it in place are silver and are up against the black. I think it would have looked better if they had also been black. We just plan to replace them with black ones at some point.Helpful (3)
No questions about this product yet.Ask the First Question
(approx) 2 Hours
Simple installation for anyone.
What's in the Box