Barricade Double Tubular Front Bumper w/ Over-Rider Hoop - Textured Black (87-06 Jeep Wrangler YJ & TJ)
ExtremeTerrain no longer carries the Barricade Double Tubular Front Bumper w/ Over-Rider Hoop - Textured Black (87-06 Jeep Wrangler YJ & TJ).
Please check out 2018-2021 Jeep JL Front Bumpers | Wrangler for an updated selection.
I'm Ryan from ExtremeTerrain.com and this is my review of the Barricade Double Tubular Front Bumper with Classic Over-Rider Hoop fitting all 1987 to 2006 Wranglers. This bumper is available in three different finishes: The textured black powder coat that you see here but also a gloss black powder coat and a polished finish. This is for those of you who like that tubular, a little bit more old school look and don't have a need for all of the features and the protection that a plate steel off road bumper will offer. This bumper is also going to be significantly less expensive than one of those heavy duty bumpers with a lot more features, but that's to be expected because it doesn't have all of those additional add-ons.This bumper is priced right around the same as a lot of other bumpers on the market that are of a similar style, but this one in particular is pretty well built. This bumper is built from a three-inch tubular stainless steel and as I said before, it's offered in your choice of a couple of different finishes, either the textured black finish, a gloss black, or a polished finish, so you can really get the bumper that matches the style you're going for on your jeep. The fact that these are made of stainless steel means that if you do get a chip in the finish, it's not gonna rust away like a mild steel bumper would. These are gonna hold up a lot better over time, especially if you go with one of the powder coated versions.Now like we said before, these are a little bit lighter duty than an off-road bumper and they don't have as many features. As you can see, this bumper doesn't offer a winch mount and honestly, if you even tried to add an aftermarket one it might be a little bit tough. You may have to a little bit of modification, and it doesn't have any recovery points built into it. However, this does have a couple of light mount tabs on it which is a nice feature.This bumper is designed to be completely bolt-on, so installation is really straightforward. The first step is to remove your factory front bumper, then you'll put this in place and use the supplied hardware to attach it onto the frame rails. Because this is designed to work on a YJ or a TJ, you're gonna have some additional hardware and some additional mounting points that you might not use, depending on what year you're installing the bumper on. Either way, it's gonna be really easy installation that shouldn't take you more than two hours to finish with the included hardware. All you'll need are some hand tools.Like I said before, there are a few different manufacturers making bumpers that have a really similar style, and most of them are gonna be right around the same price. I do like this bumper because it seems to be well built when you take a look at the weld and the finish looks pretty nice. So I would recommend some of the other ones on the market because of how this is built even though they all fall into pretty much the same price range.So if you're looking for that more old school tubular bumper look and you don't have a need for some of the features offered from a heavier duty off-road bumper, this is a really nice place to look. I think this bumper is well priced and well built.So, that's my review of the Barricade Double Tubular Front Bumper with Classic Over-Rider Hoop, fitting all 1987 to 2006 Wranglers that you can find it right here at ExtremeTerrain.com
Double Tube Front Bumper with Angled Hoop Over-Rider
Heavy Duty 3" Tubular Stainless Steel Construction
Textured Black Powder Coat Finish
Easy, No Drill Installation
Fits All 1987-2006 Wrangler YJ and TJ
Weight: 28 lbs
Aggressive Off-Road Styling. Add aggressive off-road styling to your YJ or TJ Jeep Wrangler with a Barricade Off-Road textured black double tube front bumper that features an angled hoop over-rider. Barricade Off-Roads Double Tubular Front Bumpers not only look great, but provide additional protection from brush and other trail hazards.
Heavy Duty Construction. Manufactured from heavy duty 3" diameter stainless steel tubing this Barricade Off-Road Front Bumper is completed in a durable textured black powder coat finish for aggressive good looks and long lasting corrosion resistance.
Easy, Bolt-on Installation. Barricade Off-Road Front Double Tube Bumpers are engineered to be a direct bolt-on upgrade using just basic hand tools, so there is no drilling or cutting required for a clean straight forward installation.
Application. This Barricade Off-Road Double Tubular Front Bumper with Angled Hoop Over-Rider is specifically designed to fit all 1987-2006 Jeep Wranglers, including the YJ and TJ models.
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
The site was very easy to navigate and provided me with more than enough choices to pick through. I found exactly what I was after. I thought that it was very nice to see free shipping offered for my offer. I made my choice because other customer reviews were positive and your own video reviews were also helpful while making my choice.
James C, 2006 Jeep Wrangler TJCustomer Service I’ve always loved Jeeps from a young age, after moving to Puerto Rico at the age 9 my uncle had a Cherry Red 73 CJ5 which I fell in love with. He would use that Jeep to ride up the mountains on his farm, I knew after seeing that Jeep I would have one. The fact that a Jeep can be so versatile in ever...