FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Barricade Door Storage Hangers on your Wrangler
Installation Time
30 minutes
Tools Required
- Stud Finder
- Level
- Tape Measure
- 9/16” Socket & Ratchet
- T50 Torx Bit
Shop Parts in this Guide
Contents:
(1) - Hinge Mount
(1) - Latch Mount
(5) - Lag Bolts
**Important:
Brackets MUST be installed into a studs. Failing to do so will result in Door Damage.
-Locate a suitable location to mount the door brackets. These door brackets require (2) studs to secure the door, one for the hinge and one for the latch.
-Mount the hinge upper hole first. Plum the bracket before mounting the other 2 holes.
-Once the hinge bracket is securely mounted to the wall you can measure for the placement of the latch bracket.
Locate the door hinge brackets and remove the hinge nuts(Torx T50) to allow the door to be removed.
Disconnect the plug that supplies the door electric. Then remove the door strap.
-Once the hinge bracket is securely mounted to the wall. Slide the door onto the bracket.
-Verify the latch bracket location and fasten it securely to the wall.
**Note: The door may sag under its own weight depending on the condition of the wall it is mounted on. Leveling the door (pulling up on it) may be required to mount the door level on the latch bracket using the provided measurements.
**Important:
Brackets MUST be installed into a studs. Failing to do so will result in Door Damage.
-Locate a suitable location to mount the door brackets. These door brackets require (2) studs to secure the door, one for the hinge and one for the latch.
-Mount the hinge upper hole first. Plum the bracket before mounting the other 2 holes.
-Once the hinge bracket is securely mounted to the wall you can measure for the placement of the latch bracket.
Locate the door hinge brackets and remove the hinge nuts(Torx T50) to allow the door to be removed.
Disconnect the plug that supplies the door electric. Then remove the door strap.
-Once the hinge bracket is securely mounted to the wall. Slide the door onto the bracket.
-Verify the latch bracket location and fasten it securely to the wall.
**Note: The door may sag under its own weight depending on the condition of the wall it is mounted on. Leveling the door (pulling up on it) may be required to mount the door level on the latch bracket using the provided measurements.
