FREE 1 to 3-Day Delivery on Orders $119+ Details

Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12k Summer Sweepstakes! Enter Daily>

How to Install Barricade Aluminum Rear Inner Fender Flares - Textured Black (07-17 Wrangler JK) on your Jeep Wrangler

Tools Required
  • Socket Set
  • Drill
  • Drill Bit
  • Marker
View PDF Guide
Extreme Terrain
Shop Parts in this Guide

Contents:

1) Left Inner Fender
(1) Right Inner Fender
(4) M6x1.0 Allen Head Bolts
(4) M6 Flat Washers (Large)
(12) M6 Flat Washers (Small)
(4) Lock Nuts
(8) Phillips Screws
(1) Allen Wrench

Locate the factory mounting locations on fender well.


Secure the rear fender liners using the supplied Allen bolts. **Note: The large washer goes on the tire side of the liner. The small washer goes on the chassis side of the washer.


Mark the remaing holes for drilling. Drill a pilot hole using a 1/8" drill bit. Then drill a 5/32” hole.


Install the supplied screws/small washers into the remaining holes.


Community Support

Word On The Trail

The site is easy to use and follow along!! One of the things I really enjoy with Extreme Terrain is that you are able to shop via your specific Jeep! Just input the info and the site will let you know if what you are looking at will fit or is compatible with your specific Jeep...Love It!!!

solomo14
Previous Slide Next Slide