ExtremeTerrain is proud to offer FREE SHIPPING on any order over $119!
Free 2-3 Day Delivery on most items, see Product Page for details.
Free Shipping Offers are for Standard Ground Delivery Service and are only valid for shipping addresses within the 48 contiguous United States. Truck freight and oversize charges still apply unless otherwise noted, and can only be shipped to the lower 48 States. Tires, Wheel and Tire Kits, and certain large items do not qualify for free shipping.
Shipping to Alaska and Hawaii will require an additional charge.
Merideth: Hey, guys. So, today we're checking out the Axial Sequential LED Parking Turn Signal Lights with a Smoked Lens, fitting all 2018 and newer Sport JL Wranglers. These turn signals are gonna be great for the JL owners looking for a brighter and non-traditional lighting setup to complement the front end of their Jeep. Now, these will replace your current turn signals and will integrate a smoked lens as well as LED technology to offer a sleek look and bright lighting performance. Now, these are even gonna be great if you're looking to match any other LEDs that you've installed on your Wrangler, or if you have a damaged turn signal or one of the lights has burnt out, and you're just looking for an overall replacement, you don't wanna mess with just replacing one turn signal or the bulb.Now, these are gonna have a smoked polycarbonate lens on the front. Not only is that going to offer a very sleek look and be perfect for really anybody who's a fan of that smoked or blacked-out appearance to the Wrangler, but this is going to have some durability to it. So, if you are taking your Jeep off-road and you are looking to go out on the trails where these are placed on the Wrangler is pretty vulnerable, especially being on the upper front end of your Wrangler or the upper outside part of the fender. These are susceptible to any brush branches or any obstacles. So, having that polycarbonate lens on the front is going to be very important. And this is gonna come with that and be a lot more durable than the factory ones are.Now, these are also gonna have a factory-style ABS plastic housing. This is gonna come with the pins and the mounting points to be a direct replacement, giving these an awesome fitment and everything is going to be wired in just like the factory and is going to be plug-and-play, which I'll get to the wiring harness in just a minute. But overall, this is gonna have a very solid build. So, diving a little bit deeper into the internal of this light where the LEDs are, you're gonna have two rows of LEDs. Now, this top row is gonna be for your daytime running light. That's going to illuminate in a bright white color temperature, of course, matching with any other LEDs that you may have on your Jeep.Now, the bottom one is gonna be for your turn signal. That's going to illuminate in an Amber color and that's what's gonna have that sequential feature. So, whenever your turn signal is actuated, this is going to illuminate in an amber color with that sequential function, not only adding a lot of style to the front end of your Jeep and turning some heads, but it's also gonna make you more noticeable while you're driving on the road, which is going to help out when it comes to safety.So, aside from the build and the lighting performance, the one thing that I do really like about this set of lights is the fact that this comes with that plug-and-play wiring harness that I mentioned before. But I like it in the fact that this is all taped up. It's very clean in comparison to some other options that will have a couple of wires coming off of the light itself, but it's also gonna have factory-style clips. So, you don't have to worry about zip tying, any wiring up and out of the way, these will mount in the factory locations. And they are going to secure nicely considering that they are a factory clip. Not to mention this is gonna have a couple of resistors on each of the lights. They have a nice automotive grade 3M tape on the bottom here, and they also have two mounting points on each of the resistors, so you can Mount them up both ways, or one or the other, depending on your preference in the inside of your fender well. So, I do like the fact that it gives you some options there with the resistors on both lights and everything is going to have a very clean setup.So, when it comes to install I'm gonna give this a easy one out of three wrenches on the difficulty meter, probably taking you about an hour to get these into your Jeep with a couple of basic hand tools. Now, one of our installers here is going to walk you through it step-by-step. So, that is going to wrap it up for my review on these lights. Let's go ahead and hop into the install.Man: Tools required for this install include a ratchet, an extension, a Phillips head screwdriver, a clip removal tool, 8-millimeter socket, 10-millimeter socket, 3/8 to 1/4 inch adapter, T25 Torx bit, and a T30 Torx bit.What's up, guys? Today, we're gonna be installing a set of DRLs on our Wrangler JL, so let's get started. So, we went ahead and turned the wheel out just to kind of give us some more access to our bolts in here. So, our first step's gonna be to come in with an 8-millimeter socket and a 10-millimeter socket. We have two 8-mil bolts and one 10-mil that we have to remove. So, first, we can remove these two 8 millimeters, and then we have a 10-millimeter right up under here, and then we can pull back on this black piece. So, now we can get in with our T30 Torx bit and remove this Torx screw. Now, this Phillips head right here is usually the same T30 Torx. Ours is different, so we're gonna use a Phillips head to remove it.So, now down along the bottom here, we have two T25 Torx screws. So, I'll throw an extension on there and make it a little easier. We can get those out. So, we can take out another one of our T25 screws up top, and then we have one more T30 right here. And then we can remove our 10-millimeter up here, and that'll free up our bracket. And then we can get in here with a clip removal tool and pop out our clip. Now with our bracket out of the way, it'll give us access to our last two T25 screws. Now we can disconnect our wiring harness and use a clip removal tool to remove our clips. And now with our wiring harness removed, we can remove our daytime running light.So, the last step in our uninstall is to disconnect our side marker from our harness. You can do that with a little flathead screwdriver, or you can just use your fingernail, lift that tab up and disconnect it like that. So, now we can mount our side marker onto our new DRL. So, we have these little tabs slide into these screws and then our hole for our screw it'll slide into here. And then we can reinstall one of our T30 Torx screws. So, now we can reconnect our side marker harness, and then we'll slide our side marker through first and then our DRL.So, now we can go ahead and reinstall our four T25 screws that hold in our daytime running light. And then we can reinstall our T30 that holds our side marker to our daytime running light. So, now we can reinstall our bracket and we can reinstall our three T30 screws that hold our bracket in place. So, now we can fold up our plastic piece, get that over this reds. And now once we have that in place, we can reinstall our two 8-millimeter screws, and then we have our two 10-millimeters. So, now we can route our wiring harness back towards the firewall of our car. So, we can go up over these mounting provisions for our fender flares. Now we can connect our wiring harness, and then we can push our clips into place. So, now we can mount our two boxes. We'll pull back on our double-sided tape. Now you can mount these guys wherever you'd like, tuck them back here, stick them down.Merideth: So, that is going to wrap it up from my review and install on the Axial Sequential LED Parking Turn Signal Lights with a smoke Lens, fitting all 2018 and newer Sport JL Wranglers. For more videos just like this, remember to always keep it right here at extremeterrain.com.
Sold as a Pair, Driver and Passenger Side Included
Does Not Fit Rubicon or Sahara Models
Fits 2018-2023 Jeep Wrangler JL Sport Models with Factory Halogen Lights Only
Description
Sequential Turn Signals. These Axial Sequential LED Parking/Turn Signal Lights will add an updated modern appearance to your JL Sport. Featuring highly visible amber LEDs that sequence when activated, these Turn Signals will make an impactful statement. Whether your Wrangler Sport is your daily driver or a dedicated weekend toy, these Axial Sequential LED Parking/Turn Signal Lights will be sure to set your Wrangler apart from all the rest.
Quality Construction. Manufactured from OEM grade materials, the included Sequential Turn Signals are assembled to precise standards for long lasting quality. These Sequential Turn Signals feature durable black ABS plastic housings with smoked polycarbonate lenses and high intensity LEDs. Each housing is weather-sealed to prevent dirt and moisture from harming the state of the art electronics found inside.
Simple Plug and Play Installation. These Sequential Turn Signals were designed to be a direct plug and play replacement for your Wrangler's original factory housings. There is no cutting or modifications required for a clean straight forward install. Installation can be completed in about an hour with just basic hand tools.
Application. Axial Sequential LED Parking/Turn Signal Lights; Smoked are designed to fit 2018-2023 Jeep Wrangler JL Sport models equipped with halogen lights only. Does Not fit Rubicon or Sahara Models. Sold as a pair, driver and passenger side lights are included.
Extended Warranty. ExtremeTerrain/Turn5 Inc. is proud to offer an optional 12 month extended limited warranty to our customers that purchase an eligible product. The program administrator will replace the cost of the covered part of a period of 12 months after the manufacturers warranty elapses, or from the date of purchase if the manufacturer does not offer a warranty.
Coverage. A Covered Part has failed when it can no longer perform the function for which it was originally designed solely because of its condition and not because of the action or inaction of any non-covered parts. The benefits available under this Limited Warranty are strictly provided to you for the replacement of the Covered Part(s) which fails due to a defect.
Notification Sent Via Email. You will receive notification of your enrollment in the extended product warranty program via email within 24 hours of placing your order. Please save this email for possible future reference.
No Deductibles Required. There are no deductibles required for use of this extended product warranty. If your covered part fails within the extended warranty time frame, simply call the program administrator at 1-844-870-4881 for instructions before any repairs or replacements have begun. Additional contact details and instructions will be included in your confirmation email.
WARNING: Cancer and Reproductive Harm - 
