(approx) 15 Minutes
Simple installation for anyone.
- Customer Submitted:
- How to Install ATP Front Billet Grab Handles - Black on your Wrangler
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
May 15, 2019
Back in September of 2018 I purchase grab handles from American Trail Products for my 2017 Jeep JK 4 door. The issue I’m having is that all of the 3 grip handles fit perfectly but for some reason I’m having issues with the driver side bolt not fitting. The bolt goes in maybe 1/8 and it stops. I’ve googled to find the issue but couldn’t find anything so I decided to give the company a call and see if they have a solution. Fast forward to today (May 14) 9 months later and still having the same issue because the company is so hard to deal with. I’ve tried calling, emailing, and even trying to contact them via Instagram messenger. Their phone directs you to an automatic voice system that you can only press “0” for assistance. Followed by a voice mail recorder. Instagram messenger works best. I’ve tried everything that they suggested. Sent photos. Talked to so many people from the owner, office, and even accounting. Nothing worked. I asked them if they can send me new bolts and they owner insisted that it’s not their product that’s defective but my car. All I asked for was for 2 replacement bolts for the $299.79 that I spent. I hope the owner and staff will read this review since they read my other review on google with their 2.2 star rating and understand that the client is asking you for help on your product that you produce and when you start disrespecting the people that support your company, it’s not good for business. Pros: Matches with car Cons: No customer service Rude No phone No email Frustration Headache Long delays when sending ig messages Poor customer care serviceHelpful (5)
December 19, 2018
Blinded by the SUN
I ordered these and love them, They look great and made very well. Except once installed, I now can not lower the sun visor, the visor hits the grab handle. If any one can give me a idea on how to fix this problem I sure would appreciate it.Helpful (13)
March 22, 2018
ATP Good job
Solid product love it... Keep all four bolts loose during installation, once it’s fully connected Tighten her upHelpful (7)
December 01, 2017
Great product that once installed is completely sturdy and does what it's supposed to. Just leave all the bolts loose and tighten them one at a time little by little and it goes right in in about 5 minutes. Worth every penny!Helpful (9)
November 16, 2017
Well made, but not impressed with color.
It's a good product and well made. However, I ordered "red" and it's more of a burgundy/maroon anodized. I was hoping the red would match the interiors' red accents and stitching. I will most likely remove the things and have them Cerakoted. Anyway, here are a few things that may help on install: CAREFUL! It's easy to whack the windshield when removing the old bolts and installing the new grips. Also, when removing the existing bolts be careful not to drop one into the pillar trim. However, the old existing bolts are not reused so if it falls, you can retrieve it at your leisure. The fit is a bit tough to get right unless all the screws are left loose. The short spacer spool goes on the pillar. When installing this short one on the drivers side pillar, be careful not to crimp any wires inside. The long spool goes into the roof. Install the short one on the pillar first, but leave loose until the rest is loosely assembled together. Gravity is not your friend, pieces like to drop, and you've a number of things to hold in place while tightening the bolts. Tighten bolts together switching from one to another and wiggle the spool assembly a bit to get a good seat.Helpful (13)
August 10, 2017
Love the Billet Grab Handle
The Billet Grab Handles look great in my 2016 Jeep Wrangler. Easy to install, a little pricey but overall looks great.Helpful (10)
August 07, 2017
Bad in hot weather!!!!
Yes, they look great and are very sturdy BUT if you live in southern Florida, you won't be using them in the hot weather. They get hot and STAY hot for a very long time. You cannot grab them!!! I would not buy again.Helpful (14)
August 01, 2017
Finally a handle that's super strong out-of-the-way and looks tough. Sure it cost a bit but it's billet aluminum with a great finish and anchors to your jeep with no apologies. Your view is not blocked and it goes with the strong look of your jeep. I have a 2015 Unlimited Rubicon lifted 4 inches. These handles (in black) are easy to grab and get you in and out without wobbling. Placement is everything with handles I think. You've got to be able to pivot your body into the seat. I'm 240 pounds. I can pull duck and swing in. Installation was a little tricky because you have to line the bolts up just right to not strip them and then they angle against each other, but when tightened properly it is super steady and strong at the conclusion.Helpful (11)
August 01, 2017
Nice fit, but gets in the way of the sun visor.
Nice and sturdy, but they block the sun visor from going forward to the front window. Ok if you can live with that.Helpful (13)
July 31, 2017
Awesome handles other than heat retention
These handles are solid and look great! Only issue is here in the desert they hold the heat. Fixed that by coating them with plastidip clear for a little insulation.Helpful (11)
Do these ATP front billet grab handles interfere with positioning the sun visors either forward to the windshield or to the side windows?
The ATP Front Billet Grab Handles will not interfere with placing the sun visors down to the front windshield. These may contact when putting the visors over to the side windows.
Will this item fit my Wrangler Sport 2 door 2010 model?
Absolutely! The ATP Front Billet Grab Handles are compatible with Jeep Wrangler JK models released from 2007-2017.
You saying these handles will not interfere with the sunvisors yet many of the reviews say they do please explain
Received handles but box stated for 2016 I have 2018 jk is this why they don’t fit on vehicle
The ATP Front Billet Grab Handles are compatible with 2007-2018 Jeep Wrangler JK models.
Will these fit a JL?
ATP Front Billet Grab Handles will not fit a JL Wrangler.
TheATP Front Billet Grab Handles will be a dark green, you can check out our customer photos for reference!
Thank you for your question! Photo examples of the other color options can be found in our customer photos section!
(approx) 15 Minutes
Simple installation for anyone.
What's in the Box