Armordillo Classic Bull Bar; Polished (16-23 Tacoma)

Front Protection for Your Vehicle. The front end of your rig is vulnerable to damage which is why you need a Tacoma Bumper Push Bar or Bull Guard. This classic bull unit was created to lessen the consequence of accidents and preserve the front of your bumper and grille. Additionally, the shiny, chrome finish adds to the appearance of your vehicle.

Lighting Holes. Pre-drilled holes in the bull bar allow you to add additional lighting to your vehicle while ensuring that your front-end protection remains the top priority. Also, this means that you don't have to sacrifice any additional lighting that you may have already installed.

Tube Construction. This bull bar is made of 3 Inches of seamless mandrel-bent tubing, making it both sturdy and visually appealing. With this bull bar, you'll be driving in style without sacrificing your vehicle's front-end safety. In addition to providing maximum strength, its angular-shaped steel construction adds sturdiness and classiness to the bull bar's appearance.

Bolt-On Installation. The installation doesn't require any drilling. You simply need to get under your vehicle and look for the mounting holes. The lower mounting brackets should be screwed into place, but the bolts should be left slightly loose to allow for future adjustments. Match the mounting holes in the brackets with the holes in the bull bar and tighten the bolts.

Application. The Tacoma Bumper Push Bar fits the 2016-2023 Toyota Tacoma models.

Installation Difficulty. The installation process is straightforward and can be done without previous experience. It'll take around half an hour to install the bar.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov