How to Install an Alloy USA Left Rear Axle Shaft 30-Spline on your 2003-2006 Jeep Wrangler TJ

THANK YOU FOR SELECTING A HUSKY FLOOR LINER FROM WINFIELD CONSUMER PRODUCTS.

Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle with a weight in each corner (a book works well). After a few minutes, your liner will remain flat. In colder climates this “relaxing” may take longer; moving the liner to a heated area will accelerate the process.

Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

YOUR CARGO LINER IS DESIGNED TO FIT WITH THE 2ND ROW SEAT BACKS ADJUSTED TO THEIR MOST UPRIGHT POSITIONS. PLEASE MOVE THE SEATS TO THIS POSITION BEFORE INSTALLING. ONCE THE LINER IS INSTALLED, THE SEAT BACKS CAN BE ADJUSTED.

YOU CAN EASILY ACCESS THE CARGO HOOKS IN THE SIDE CARGO PANELS BY POSITIONING THEM OVER THE EDGE OF THE LINER. THE HOOK LOCATIONS IN THE REAR OF THE CARGO AREA ARE PARTIALLY COVERED BUT CAN BE FULLY ACCESSED BY SIMPLY REMOVING THE RECESSED AREAS IN FRONT OF THE HOOKS WITH A PAIR OF SCISSORS OR A UTILITY KNIFE.