Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler! Enter daily!

Airaid MXP Series Cold Air Intake w/ SynthaMax Dry Filter (12-18 3.6L Jeep Wrangler JK)

$0.00
Market Price $406.99 You Save 12% ($47.56)
Our Price

$359.43

FREE Shipping

  • Item J16402

Will this fit your Wrangler?

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Improves Horsepower and Fuel Efficiency
    • Dry - SynthaMax Filter Included
    • Provides Filtration Down to Two Microns
    • Filter is Washable and Reusable
    • Available with Either a Blue or Red Filter
    • Unique Air Box Design with Lid
    • 50-State CARB Certified - D-609-19
    • Fits 2012-2018 Wrangler JK with 3.6-Liter Engines

    Review & Installation Video

    Review & Install Video

    Increase Performance. This Airaid MXP Series SynthaMax Cold Air Intake is be compatible with the new 3.6L Pentatstar motors on the 2012-2018 JK Wranglers, Rubicon and Unlimited. It works with both 2 door and 4 door models. The housing is fully included, and the inlet tube is included.

    Superior Filtration. Each cold air intake provides superior air filtration, since it includes an Airaid Premium Filter with SynthaMax® technology. SynthaMax® is a non-woven synthetic nano-fiber material that traps the smallest dirt particles that ordinary cotton-gauze "performance" filters just can't capture. Airaid Premium Filters, with SynthaMax® can capture particulates down to 2 microns in size. Best of all, this filter is washable and doesn't need to be oiled, which will save you time and money.

    Unique Air Box Design. This Airaid MXP Series Cold Air Intake features a specially designed one-piece roto-molded intake box that draws cooler outside air from the factory cold air duct while the unique shape improves airflow around the entire filter.

    CARB Certified. Best of all, this Airaid MXP Series Cold Air Intake is 50-state smog legal under Carb EO# D-609-19.

    Application. This Airaid MXP Series SynthaMax Cold Air Intake is designed to fit on the 2012-2018 Wrangler JK with the 3.6L engine.

    Note: Coupon codes cannot be applied to this product.

    Fitment: 2012 2013 2014 2015 2016 2017 2018 Details

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • (1) Airaid Premium Filter
    • (1) Intake Tube
    • (1) Cold Air Box
    • (1) Airbox Lid
    • (1) Filter Adapter
    • (1) Double Hump Hose
    • (1) Silicone Reducer
    • (1) Airbox Lid Gasket
    • (1) Air Scoop Bracket
    • (1) Engine Cover Grommet
    • (1) 3/8 NPT x 5/8 Barbed Fitting
    • (2) 1/2” Adel Clamp
    • (1) #48 Hose Clamp
    • (1) #64 Hose Clamp
    • (2) #72 Hose Clamp
    • (2) #19 Speed Clamp
    Installation Info
    Will it fit my Wrangler?
    • JK Rubicon 2 Door - 12, 13, 14, 15, 16, 17, 18
    • JK Rubicon 4 Door - 12, 13, 14, 15, 16, 17, 18
    • JK Wrangler 2 Door - 12, 13, 14, 15, 16, 17, 18
    • JK Wrangler 4 Door - 12, 13, 14, 15, 16, 17, 18

      Customer Photos (4) Submit Your Photo

      View All 4 Photos

        Questions & Answers (3)

        3 Top Rated Questions

        Description says: >>> Note that this part is so intense that it’s not legal for sale or highway use in California. and >>> This Jeep Wrangler Cold Air Intake System is legal for use in all 50 states, including California, on Carb EO# D-609-17. So, is it legal or not in California?

        • Hello, the description has then been changed and we do apologize for that. This Cold Air Intake is legal for use in California.

        Helpful (1)

        does this intake require a reflash

        • No, the Airaid MXP Series Cold Air Intake does not require a custom tune or re-flash.

        Helpful (0)

        I am eventually looking to add a snorkel to my jeep, will this cold air intake allow for a snorkel kit? if yes is there anything in particular i should look for when choosing the right kit?

        • The Airaid MXP Series Cold Air Intake SynthaMax Dry Filter (12-14 Wrangler JK w/ 3.6L) should accept a snorkel, however, may require modification to do so. As well, the box may not be watertight.

        Helpful (0)
        Post Your Question

          Customer Reviews (20) Write a Review

          Overall Rating 4.8

          out of 5 stars

          Installation Time:Afternoon

          • Performance Gain 4.15 4.2
          • Fit 4.6 4.6
          • Bang For Your Buck 4.6 4.6



          • 3/5

            Installation Time: Afternoon

            March 11, 2019

            Review from Airaid MXP Series Cold Air Intake w/ SynthaFlow Oiled Filter (12-18 3.6L Jeep Wrangler JK)

            Nice product but needs some design work

            If you have the slightest mechanical ability and a few tools you can install this kit. That being said this one could use a little redesign. The cutting of the factory snorkel is not a huge deal but Airaid could easily just include a bolt on snorkel or redesign the air box so it accepts the stock as a bolt on without cutting it up. I would pay extra not to have to irreversibly modify my stock box. This would also save on the half tube of silicone you will use trying to seal the joint where the air box meets the stock snorkel - the gaps are large. Looks good and functions well after its on but takes a fair bit of time to waterproof (cure and dry) that could be avoided with an additional part or box redesign. More work than necessary from the installation end.

            Stampederfan

            Year: 2018Submodel: Wrangler

            Helpful (1)

          • 5/5

            Installation Time: Less than 1 Hour

            January 30, 2019

            Good product simple instructions

            This product is high quality, the instructions were good and installation was straightforward.

            BillV

            Year: 2018Submodel: Rubicon

            Helpful (5)

          • 5/5

            Installation Time: Afternoon

            July 22, 2018

            Review from Airaid MXP Series Cold Air Intake w/ SynthaFlow Oiled Filter (12-18 3.6L Jeep Wrangler JK)

            Great Enclosed Intake

            Much better intake than all of the open air “cold” air intakes available for the JK. Re-using the factory intake snorkel is a nice touch as well. Install is straight forward other than cutting the snorkel. Please take your time and make a straight cut as I did not, but I still had enough material that it fit in the air box adapter. Sound is noticeable to an extent. Not as loud as open air intakes. #1 complaint and foreseeable problem is that this intake requires you to flip around the factory air box breather line. Once you flip it the hardline is much smaller than the breather tube and is only held on by a QuickClip (as per the instructions).

            offroadjk

            Year: 2018Submodel: Wrangler

            Helpful (7)

          • 5/5

            Installation Time: Afternoon

            February 28, 2018

            Very Nice

            This air intake is great, looks good, sounds good and the Instructions where easy to read. Does take a little bit of patience but not much. The only issue I had was one of the nuts didn’t fit the screw intended for it. But overall very satisfied. Haven’t really notice a increase in MPG but have noticed a increase in power, especially on the highway and there is a noticeable growl from the intake when you get into the 2-3k rpms.

            Jmaraccini

            Year: 2014Submodel: Wrangler

            Helpful (8)

          • 5/5

            Installation Time: Less than 1 Hour

            December 26, 2017

            Amazing!!!!

            I just received this cold air intake. It took me about an hour to put in, it was very easy. I noticed an immediate gain of Power and around 3.5 to 4 miles gained per gallon. All you got to do is make one small cut in your factory intake tube with a hacksaw. Instructions were pretty easy to follow. Awesome intake!

            ElliotD

            Year: 2017Submodel: Wrangler

            Helpful (13)

          • 5/5

            Installation Time: Afternoon

            September 02, 2017

            Pleased!

            It increased my MPG's which is mainly what I was looking for from it...

            DavidH

            Year: 2016Submodel: Rubicon

            Helpful (9)

          • 5/5

            Installation Time: Afternoon

            August 26, 2017

            Airaid

            Sounds great and felt better throttle response immediately Really took my time with the install so was over 2hours but fits great. The product has a lot of good features and thought like upgraded grommets and brackets for the radiator hose. Liked how the stock air intake was repurposed and used an oscillating saw to make a clean cut. Also if I remember right this has fifty state emissions.

            PerryM

            Year: 2017Submodel: Wrangler

            Helpful (9)

          • 4/5

            Installation Time: Less than 1 Hour

            July 14, 2017

            Great deal

            For the price you get a decent cold air system. Only complaint is the limited chi he in filter colors which I understand blue and red are the only real choices from quality companies but a wider variety would be nice if you are trying to stick to a color scheme like I am

            Cole

            Year: 2017Submodel: Rubicon

            Helpful (9)

          • 5/5

            Installation Time: Afternoon

            June 27, 2017

            Airaid MXP

            Don't have much to say. I believe all the other reviews pretty much cover it.

            CraigS

            Year: 2016Submodel: Rubicon

            Helpful (10)

          • 5/5

            Installation Time: Afternoon

            June 23, 2017

            Review from Airaid MXP Series Cold Air Intake w/ SynthaFlow Oiled Filter (12-18 3.6L Jeep Wrangler JK)

            Great investment for performance

            Was pretty easy to install and now my JK has a nice little growl to it and a couple more miles to the gallon. Definitely looks nice as well when you open the hood.

            GeorgeH

            Year: 2015Submodel: Wrangler

            Helpful (9)

          • 5/5

            Installation Time: Less than 1 Hour

            February 16, 2017

            Fits and looks great!

            This is a great addition to my wrangler. I like the way my jeep roars... can't keep my foot off the gas pedal . It was a rather easy installation. I will highly recommend it...

            Guz68

            Year: 2015Submodel: Wrangler

            Helpful (11)

          • 5/5

            Installation Time: Less than 1 Hour

            February 14, 2017

            Great sound and performance

            Love this Airaid intake. Step by step installation made it simple to install. Looks and sounds Great.

            Nuttin747

            Year: 2013Submodel: Wrangler

            Helpful (11)

          • 5/5

            Installation Time: Afternoon

            July 08, 2016

            Review from Airaid MXP Series Cold Air Intake w/ SynthaFlow Oiled Filter (12-18 3.6L Jeep Wrangler JK)

            Very nice!!

            Install was pretty easy with the instructions given! I'm not sure on the exact horsepower gain but it was definitely noticeable at about 4000 rpm you can feel and hear it getting that extra push! I love the sound and feel! Very pleased with this product!

            Janthony82

            Year: 2016Submodel: Wrangler

            Helpful (14)

          • 5/5

            Installation Time: Less than 1 Hour

            June 29, 2016

            Nice and easy

            Very quick and easy install. Great sound. I also installed a Magnaflow OffRoad Pro-Series Catback and the Superchips programmer. I will post performance results in the future.

            MobMec

            Year: 2014Submodel: Rubicon Unlimited

            Helpful (14)

          • 5/5

            Installation Time: Afternoon

            January 21, 2016

            Review from Airaid MXP Series Cold Air Intake w/ SynthaFlow Oiled Filter (12-18 3.6L Jeep Wrangler JK)

            Airaid Cold Air Intake Is Great

            I could not be happier with this product , it was easy to install and only basic tools was needed to install this product . must use appropriate width hacksaw in order to make the cut to finish the installation of the product . I noticed increased acceleration from 1st,2nd,and 3rd gear, it feels like a new vehicle

            tj55

            Year: 2015Bronx, NY, USA

            Helpful (12)

          • 5/5

            Installation Time: Afternoon

            August 21, 2015

            Review from Airaid MXP Series Cold Air Intake w/ SynthaFlow Oiled Filter (12-18 3.6L Jeep Wrangler JK)

            Airaid MXP

            This product delivered just what I was looking for. Not looking for more top-end horsepower; I wanted improved driveability and better acceleration in the low- to mid-range and this product delivered!

            NCJeeper

            Year: 2014Chapel Hill, NC

            Helpful (12)

          • 5/5

            Installation Time: Less than 1 Hour

            June 23, 2014

            Review from Airaid MXP Series Cold Air Intake w/ SynthaFlow Oiled Filter (12-18 3.6L Jeep Wrangler JK)

            Put some rumble in my jeep

            This product was easy to install, I invited a buddy over that has done a few of them. The fit is great except it adds a step to remove the fuse box lid. It defiantly adds a beastly sound when the jeep gets over 4,000 rpm's. The only problem is I stomp on the gas everywhere now. Would you rather breath threw a straw or normal? I'm sure my motor feels the same way.

            SageH

            Year: 2014South Texas

            Helpful (13)

          • 5/5

            Installation Time: Afternoon

            January 31, 2014

            Looks great

            The instructions were clear, everything fit perfectly, the MPG whent up my 1mpg on my 4door jk. Great product

            Gabe

            Year: 2014St. Pete Florida

            Helpful (16)

          • 5/5

            Installation Time: Afternoon

            December 20, 2013

            Jeep airaid

            i found it easy to install, so far I noticed about a 1 mpg increase in fuel economy and a slight increase in power

            PeterD

            Year: 2013Arizona

            Helpful (12)

          • 5/5

            Installation Time: Less than 1 Hour

            June 07, 2013

            Factory Fit - Great Sound

            Just installed the AIRAID last night. I was very pleased with the tolerances of how the whole system fit. It has a factory fit and a great sound. While pulling a trailer and going up a hill I could hear the air being sucked in when my jeep hit 4000 rpm. I liked the sound but not sure I noticed too much of a performance upgrade but I am sure there is one. I figured this filter will pay for itself over the next couple years so I went ahead and bought it. You do have to cut the air intake off your stock jeep which takes the longest time. I used a dremel with a plastic cutter blade. I would cut it to 2.75 inches and not the 3 inches in the work instruction. The work instruction was great though with arrows and numbers.

            RedDirtYeti35

            Year: 2013Weatherford, OK 73096, USA

            Helpful (18)

          Related Wrangler Categories