(approx) 1 Hour
Simple installation for anyone.
$69.99 (pair)FREE Shipping on orders over $75
Ryan: These Hauk Off-Road A-Pillar Light Mounts are for anyone who has a 2018 and up JL that are looking for a way to mount some lights up on the A-pillar of your Jeep for auxiliary lighting. Whether you plan to use those lights off-road or on-road, this is a really popular location to mount lights and this bracket's going to make it so you don't have to drill any holes in order to do so. That being said, this is a very, very simple one out of three wrench installation for the brackets of course. The lights can be a little bit more complicated depending on what style you have, how you have to wire them up. But today we're talking about the bracket, they are very, very simple to install and Tony's going to show you how to do it in just a second.So Hauk Off-Road has been making some parts for the JL before a lot of other companies out there and they've been doing a really nice job. This bracket here is going to be really stout especially for what it needs to be. It's really just holding a light, doesn't have to be overly beefy. But it's nice thick steel. I really like the coating on it. One thing that I'm not crazy about with some of these parts, is the fact that they have the Hauk logo cut right into them. But with a part like this, once you have the light on it you're not really going to see it so it's not going to be that much of a drawback. One of the other things that I really like about these brackets is that they are really sleek and slim. They use these two bolts up on the top of the cowl where as for example, the Mopar brackets, they use these two holes but also these ones down on the side here, so they're a lot bulkier. Now those ones give you the opportunity to mount lights on the side, should you choose to where these ones don't. But I just really like this design a lot better. I think most people are going to be mounting lights up on the top here and not down on the side. This is going to be a single A-pillar light mount. I'm sure somebody will come out with a double as they were doing for the JK. But, for now, this is just a single for the JL. Really nice piece. Installs very easily and is a very fair price especially for the quality that you're getting here. These are only going to be right around $70 for a pair which I think is going to be a great buy. I mentioned before this is a simple bolt on install, now Tony's going to show you how to do it.Tony: Tools used for this installation are as follows. We have a small impact driver with a T40 Torx bit and a 5/32 Allen Key. All right. Thanks, Ryan. Now we're going to go ahead and get started with the installation of our new light mount here on the cowl of our JL Jeep Wrangler. Now we're going to take out our factory T40 Torx bits and get rid of those because you're gonna utilize a new hardware that comes in the kit with longer bolts and spacers that fill in this countersunk bolt hole that way it doesn't scratch up the cowl of your Jeep too much. Now let's go ahead and get started.Now with our T40 Torx bit, go ahead and remove our two factory bolts. All right. We're going to go ahead and get our spacers into place. Go ahead and line our bracket up and get our new hardware installed. We're going to start our hardware by hand. And with a 5/32 Allen Key we're going to go ahead and tighten them down. All right. Now everything we just did here, we're going to repeat on the other side. There's no different steps at all.All right. Now that brings us to the end of our installation of our new light mount brackets on the cowl of our JL Jeep. Now you can go ahead and mount whatever light that you choose right here on our light brackets. And if you find a light bar that fits in between the two, that would be awesome. You could put a little square pod there. You can even put a nice big round old school KC style light on there. Now for more parts and videos like these, make sure you visit us right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Mount Up. When you’re looking for an easy way to put some extra lights on your 2018-2020 Jeep Wrangler JL, you’re going to need some mounts. These Hauk Off-Road A-Pillar Light Mounts are going to bring you some great access to your lighting while also standing the test of time.
Heavy-Duty Steel. These mounts are crafted from heavy-duty steel and feature the Hauk logo etched on them. Completed with a textured black finish, these mounts are protected from corrosion and other on-the-trail problems like scratches, dust, and debris. It will last you a very long time against the nastiness the trail always brings along.
6-Month Warranty. The finish on this kit is protected by a 6-month warranty against defects and other problems. Please see Hauk’s full warranty for more information.
Application. These Hauk Off-Road A-pillar Light Mounts are designed to fit 2018-2020 Jeep Wrangler JL models.
Fitment: 2018 2019 2020
Hauk Off-Road ACC-7368
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
10 More Questions