Thermal R&D 3-Inch Cat-Back Exhaust with Cermaic Coated Muffler (21-26 2.7L EcoBoost Bronco 2-Door)Find parts that fit my vehicle

Ford Bronco 2.7L Catback Exhaust — 3" High-Clearance System w/ Ceramic Coated Muffler The Ford Bronco 2.7L was built to go places most vehicles can't. This catback exhaust was built to go with it. Thermal R&D engineered this system from the ground up with a frame-hugging design that preserves every inch of the Bronco's factory ground clearance — so you get the aggressive, drone-free exhaust note the 2.7L V6 EcoBoost deserves without giving anything up underneath. No slip-fit adapters, no compromises. Just a direct bolt-on built specifically for the 2021+ Bronco in both 2 door and 4 door configurations. Key Features: Lifetime Warranty Backs Every System We Build Frame-Hugging Design Engineered To Preserve Maximum Ground Clearance 3" T304 Stainless Mandrel-Bent Tubing For Maximum Flow And A Drone-Free Aggressive Sound True Helmholtz Technology Cancels Drone At The Source — Not By Choking Flow Ceramic Coated Rear Muffler For Heat Reduction And A Distinctive Look Under The Rig Direct Bolt-On To OEM Catalytic Converters Using Factory Hangers — No Cutting, No Welding Fits 2021+ Ford Bronco 2.7L V6 — 2 Door And 4 Door Like every exhaust we make, this system is built from T304 mandrel bent stainless steel with a mill finish on the tubing. The ceramic coated rear muffler is the standout detail — purpose-built to handle the high heat environments that come with serious off-road use, and visually distinct in a way that holds up trail after trail. The system mounts directly to your factory catalytic converters using OEM hangers with no cutting or welding required. Your OE emissions equipment stays fully intact — no check engine lights, no DEQ issues. True Helmholtz Technology isn't a marketing term. It's a physics-based resonance solution — precision-tuned chambers that identify and cancel the specific frequencies that cause drone, without restricting the exhaust path. The result is an aggressive, deep tone under throttle and a composed, controlled note when you're crawling the trail or cruising the highway. Built for both. This is what the Bronco 2.7L exhaust should have been from the factory — order yours and find out. System Specs Fits 2021+ Ford Bronco 2.7L V6 EcoBoost — 2 door and 4 door 3" T304 stainless steel mandrel bent tubing — mill finish Ceramic coated rear muffler for heat reduction and visual impact True Helmholtz Technology to eliminate cabin drone Frame-hugging design engineered for maximum ground clearance Direct bolt-on installation using OEM hangers — no cutting or welding required Does not alter OEM catalytic converters or emissions components Manufactured in the USA Lifetime Manufacturer’s Warranty .trd-copy-wrap ul{ list-style: disc; padding-left: 1.5em; margin: 0 0 1em 0; } .trd-copy-wrap ul li{ padding-left: 0.25em; margin-bottom: 0.4em; line-height: 1.5; } .trd-specs ul{ list-style: disc; padding-left: 1.5em; } .trd-specs ul li{ padding-left: 0.25em; margin-bottom: 0.4em; line-height: 1.5; } .trd-video{ position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; margin: 32px auto; width: 100%; max-width: 1100px; } .trd-video iframe{ position: absolute; top:0; left:0; width:100%; height:100%; border:0; } @media (min-width:768px){ .trd-video.full-bleed{ width:110%; max-width:none; left:-5%; } } @media (max-width:768px){ .trd-video{ margin:20px 0; width:100%; left:0; } }

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov