Suparee 7-Inch Turbine Style RGB LED Headlights; Black Housing; Clear Lens (76-86 Jeep CJ7; 97-18 Jeep Wrangler TJ & JK)Find parts that fit my vehicle

Features:Upgraded Design LED Halo Headlights: 3d RGB LED lens three-dimensional sag design, enhanced stereoscopic. Multi-function, including adjusting brightness, music mode, modifying patterns, timing function, flashing function, automatic control.Easy to install, plug & play, H4 to H13 adapter included.Come with installation instruction.App for both IOS and Android systems, for light color control.Flashing color-changing LED headlight bulb replaces original halogen and HID headlight.IP68 Waterproof features durable die-cast housing with a corrosion-resistant coating, as well as a tough PC lens. Each light is epoxy sealed to prevent moisture.DOT, SAE, E-Mark approved, legal on the road & One Year WarrantySpecs:High Power: 80W/set, 40W/pcOperating Voltage: DC12~24VLumens: High beam@9000LMs, Low beam@6000LMsColor Temperature: 6000K White & RGB Halo ringPlug and Play: H4/H13 plugLifespan: Over 50000 hoursDOT, SAE,E-Mark approvedInstallation Steps:In order to make the headlight work, and to achieve the headlight high/low beam switch, please connect H4 connect to the car, you may need a converter to match if your car plug is h13 ( The package comes with an h13 to h4 converter).The red wire is connected to the car ACC and the black wire is connected to GNC.If Blueline 1 is connected to the left headlight, please connect Blueline 2 to the left turn signal line of the car. If White line 1 is connected to the left headlight, please connect White line 2 to the left turn signal line of the car.APP Tips：Please don’t select any mode in “Setting”>” RGB Scheduling”, If you select one of the modes, it will cause the issue that the light becomes red once you choose a green color or become green once you choose red.In order to solve this issue, we suggest you select “GRB” in the “RGB Scheduling” and set the Pixel as 36, which will help the halo light work the way around（If the Pixel is <36, it will cause the issue that the halo just work on a small piece like the figure above）Please follow the steps to fix the issue mentioned above : Step1: Slide the RGB Scheduling and choose “GRB”, Click the Pixel as the figure shows: Step2: Enter number “36” and click “Confirm”.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov